User manual DURKOPP 100-68 PARTS LIST

[. . . ] 100-68/1 ­ Production of trousers For the production of trousers the machine can optionally be equipped with a bundle clamp and the corresponding rest table as well as with an ejector roller or blowing device. 100-68/2 ­ Outside pockets of men's jackets Equipment configurations for straight and slanted piped pockets, with or without flap, with or without pocket bag, flip stacker with automatic lowering device. [. . . ] 100-68/2 ­ Outside pockets of men's jackets Equipment configurations for straight and slanted piped pockets, with or without flap, with or without pocket bag, flip stacker with automatic lowering device. 100-68/2 ­ Universal use The quick change between the production of trousers and men's jackets is enabled by a second photocell and max. Performance examples of the sewing units 100-68/1 and 100-68/2 The indicated performance data are daily average output which can also be considerably higher depending on the processing method and the material preparation. The Dürkopp Adler specialists will be pleased to advise you on the selection of the optimum machines for your application. 100-68/1 ­ Lining inside pocket, jacket Additional parts: Piping strip (example: needle distance 4, 8 mm), two pocket bag halves; approx. The field of application covers all sectors of the clothing industry and includes all variants of straight and slanted pocket shapes. In case of thread breakage the needle thread monitor puts the corner knives out of operation automatically and the machine stops the sewing process. The automatic corner incision device is freely programmable without mechanical adjustments thus allowing maximum flexibility. it is swivel-mounted so that it is easily accessible to the technician. The new control panel with touch screen and colour graphic display simplifies the programming considerably and allows a quick access to all parameters while programming and sewing. [. . . ] it is swivel-mounted so that it is easily accessible to the technician. The new control panel with touch screen and colour graphic display simplifies the programming considerably and allows a quick access to all parameters while programming and sewing. [. . . ]