User manual EDEN MA40

[. . . ] Safety and Maintenance instructions - Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instructions. - Do not overload electrical outlets or extension cords, fire or electric shocks can be the result - Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances. [. . . ] Keep the system AT LEAST 10 ft away from the devices during installation and operation. Only clean the outside of the devices with a soft, dry cloth or a brush. 1 2 SC20 3 4 5 6 Do not use any carboxylic cleaning agents or petrol, alcohol or similar. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning. The sender and receiver are connected with each other by an invisible infrared beam. The attractive design and the functioning of the batteries ensure a wide application area like house, office and shop. ANVÄNDNING - Placera sändaren (a) och mottagaren (b) på ett sådant sätt att det finns minst 2 meters fritt utrymme mellan dem, till exempel på båda sidorna av en ingång eller en korridor (4) - Ställ in sändarens känslighet (a) (5), från 2 till 6 meter är LÅG och från 6 till max. INSTALLATION - Unscrew with a small screwdriver (cross head) the little screw (2a) at the sender (a) and receiver (b) - Open at both places the cover of the battery compartment (2b). FUNCTION - Place the sender (a) and the receiver (b) in such a way that there is at least 2 meter of free space between them, for example on both sides of a doorway (4) - Set the sensibility of the sender (a) (5), from 2 to 6 meter is LOW and from 6 to max. - Set the sound intensity of the receiver (b) with the VOLUME switch (6). [. . . ] Take as well care of (sun) light reflection of mirrors, window panes and other shining surfaces TECHNICAL SPECIFICATIONS Detection range maximum 20 meter Batteries 3 x 1. - Tænd for senderen (a) og modtageren (b) (9) TIPS - Ved brug over længere tid på en fast placering, kan SC20 strømforsynes ved brug af en adapter (6V 200mA, ydersiden +, kernen -) - Sørg for, at senderen og modtageren er sammenkoblet omhyggeligt, da strålen er meget præcis. [. . . ]