User manual EPSON ELPDC06

[. . . ] v Do not use or place the unit in locations with high humidity or locations where it may become wet, such as outdoors or near a bath or shower. v When using the unit, do not look into the camera lens when the LED lamp is on. 2 Caution v Do not place any heavy objects on the unit. v Be careful not to pinch your fingers in the movable parts of the unit. v Do not place the unit on an unstable location, such as a shaky table or slanted surface. [. . . ] Extend or retract the camera arm to adjust the image size and press the [ ][ ] buttons to enlarge or reduce the image size. If you want to rotate the image, turn the image rotation dial. 8 Displaying Live Action or an Image from a Whiteboard Procedure A Turn the camera head to display live action or an image from a whiteboard or wall. B If you want to rotate the image, turn the image rotation dial. Connecting to a Computer to Display Images To connect the document camera to a computer, you must install the included ArcSoft Application software for ELPDC06. When the software is installed, the computer can be used to operate the document camera and capture images. In addition, large images can be displayed by connecting the computer to a projector. 9 Using the ArcSoft Application software for ELPDC06 This section explains how to operate the unit when it is connected to a computer. In the following explanations, unless otherwise noted, Windows screen shots are used. However, the screens will be similar even when using Macintosh. Installing the Software Note the following points before installing the software: v Quit all programs that are currently running before installing the software. v For users of Windows XP/Vista, install the software as a user with administrator rights. v See the Appendix for the operating environment necessary for the software. Procedure For Windows A Insert the CD-ROM into the computer to start the installation for ArcSoft Application software for ELPDC06. B When you see the license agreement, click "Yes". D When the installation complete screen appears, click "Finish". ELPDC06 Button Manager must also be installed. Do not clear the check box. E Install ELPDC06 Button Manager. When you see the license agreement, click "Yes". F Follow the instructions to install the software. G When you click "Finish", the installation is complete and the on the computer desktop. icon appears 10 For Macintosh A Turn on the computer. C Double-click the "ArcSoft Application software for ELPDC06" icon in the EPSON window. Installation starts. D When the installation complete screen appears, click "Finish". ELPDC06 Button Manager must also be installed. Do not clear the check box. E Install ELPDC06 Button Manager. When you see the license agreement, click "Yes". F Follow the instructions to install the software. G When you click "Finish", the installation is complete. Note If ELPDC06 Button Manager is not installed, the [ unit is connected to a computer. ][ ] buttons cannot be used when the 11 Uninstalling the Software Procedure For Windows Click "Add or Remove Programs" or "Uninstall a program" in "Start" - "Settings" "Control Panel" and delete the ArcSoft Application software for ELPDC06. For Macintosh From "Applications", delete the ArcSoft Application software for ELPDC06 folder. Saving Displayed Images When the unit is connected to a computer, images can be captured and displayed as a slide show. Procedure A Connect the unit to the USB terminal of a computer and start the ArcSoft Application software for ELPDC06. For Windows Click "Start" - "All Programs" - ArcSoft Application software for ELPDC06. For Macintosh Double-click the Applications folder of the hard disk volume in which ArcSoft Application software for ELPDC06 is installed, and then double-click the "ArcSoft Application software for ELPDC06" icon. B The start screen appears. See the table below for details on using the capture screen. This screen consists of two windows: the capture album window and the capture preview window . In the capture screen, you can use the document camera to capture still images or videos. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. vConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. vConsult the dealer or an experienced radio/TV technician for help. 20 WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. [. . . ]