User manual EPSON LX-1050+ ESCP MANUAL

[. . . ] Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Trademarks EPSON® and EPSON ESC/P® are registered trademarks of Seiko Epson Corporation. Microsoft®, Windows®, and Windows NT® are registered trademarks of Microsoft Corporation. 3 IBM® is a registered trademark of International Business Machines Corporation. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. All rights reserved. 4 Safety Instructions Warnings, Cautions, and Notes w c Warnings must be followed carefully to avoid bodily injury. [. . . ] Note: If the printer driver is installed in the client beforehand, you need to select the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the printer server's OS is Windows Me or 98, go to the next step. If the printer server's OS is not Windows Me or 98, go to "Installing the printer driver from the CD-ROM" on page 77. Make sure of the name of the shared printer, and select whether to use the printer as the default printer or not. Click OK, and then follow the on-screen instructions. Printer Software 67 Note: You can change the shared printer's name so that it appears only on the client computer. With Windows XP or 2000 Follow these steps to set Windows XP or 2000 clients. You can install the printer driver of the shared printer, if you have Power Users or more powerful access rights even if you are not the Administrator. For Windows 2000 clients, click Start, point to Settings, and click Printers. For Windows XP Professional clients, click Start, and click Printers and Faxes. For Windows XP Home Edition clients, click Start, click Control panel, then click Printers and Faxes. For Windows XP, click the Add a printer in the Printer Tasks menu. 68 Printer Software 3. The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network. If the printer driver is installed in the client beforehand, you need to select the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the printer server's OS is Windows NT 4. 0, go to the next step. 76 Printer Software If the printer server's OS is not Windows NT 4. 0, go to "Installing the printer driver from the CD-ROM" on page 77. Select whether to use the printer as the default printer or not, then click OK. Click Finish. 3 3 3 3 3 3 3 3 3 3 3 3 Installing the printer driver from the CD-ROM This section describes how to install the printer driver in the clients when the computers of the server and clients use different OS. The on-screen displays on the following pages may differ depending on the version of Windows OS. Note: When installing in Windows XP, 2000, or Windows NT 4. 0 clients, you must access Windows XP, 2000, or Windows NT 4. 0 with the Administrator. If the computers of the server and clients use the same OS and the same architecture, you do not have to install the printer drivers from the CD-ROM. Click OK, and then follow the on-screen instructions to install the printer driver from the CD-ROM. Printer Software 77 2. [. . . ] Hold the bottom left and right sides of the printer firmly to lift it. You need to move the print head by hand to remove the ribbon cartridge. If you have just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 1. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer, paper supports and knob. [. . . ]