User manual EPSON LX-300 II

[. . . ] ® User's Guide NPDxxxx-00 Copyrights and Trademarks Copyrights No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U. S. ) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. [. . . ] Click the icon of the computer or server that is connected to the shared printer, and the name of the shared printer. Then click Next. Note: The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network. If the printer driver is installed in the client beforehand, you need to select either the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the printer server's OS is Windows XP or 2000, go to the next step. If the printer server's OS is not Windows XP or 2000, go to "Installing the printer driver from the CD-ROM". 66 6. For Windows 2000, select whether to use the printer as the default printer or not, then click OK. For Windows XP, if another driver is already installed, select whether to use the printer as the default printer or not, then click OK. Make sure of the settings, then click Finish. . With Windows NT 4. 0 Follow these steps to set Windows NT 4. 0 clients. You can install the printer driver of the shared printer, if you have Power Users or more powerful access rights even if you are not the Administrator. Click the icon of the computer or server that is connected to the shared printer and the name of the shared printer. Then click OK. Note: You can also type "\\(the name of the computer that is locally connected to the shared printer)\(the shared printer's name)" in Network path or queue name. The name of the shared printer may be changed by the computer or server that is connected to the shared printer. To make sure of the name of the shared printer, ask the administrator of the network. If the printer driver is installed in the client beforehand, you need to select the new printer driver or the current printer driver. When the prompt to select the printer driver appears, select the printer driver according to the message. If the printer server's OS is Windows NT 4. 0, go to the next step. If the printer server's OS is not Windows NT 4. 0, go to "Installing the printer driver from the CD-ROM". 68 5. Select whether to use the printer as the default printer or not, then click OK. Click Finish. Installing the printer driver from the CD-ROM This section describes how to install the printer driver in the clients when the computers of the server and clients use different OS. The on-screen displays on the following pages may differ depending on the version of Windows OS. [. . . ] Then remove the ribbon cartridge as described in "Replacing the Ribbon Cartridge". Make sure the tractor that comes with your printer is installed in the push position. Repack the printer, ribbon cartridge, USB cable holder, paper supports, knob, and power cord in their original packing materials and place them in the printer's original box. 150 Glossary ASCII American Standard Code for Information Interchange. A standardized coding system for assigning numerical codes to letters and symbols. auto line feed When this feature is selected in the default-setting mode, each carriage-return (CR) code is automatically followed by a line-feed (LF) code. bidirectional printing Printing in which the print head prints in both directions (bidirectionally). [. . . ]