User manual EPSON STYLUS CX3600

[. . . ] All in One Product Basic Operation Guide Safety Instructions Warnings, Cautions, and Notes. 11 Maintenance Checking the Print Head Nozzles and Remaining Ink Levels . 14 Troubleshooting Using the Error Light and Other Lights to Diagnose Errors . 17 4050591-00 xxx English Parts All in One Product edge guide sheet feeder paper support extension paper support feeder guard document cover Basic Operation Guide All rights reserved. [. . . ] For more information about selecting paper size, see "Buttons" on page 4. Once this has been pressed, all lights on the control panel will light up briefly. The paper being copied will come out automatically to the output tray. 6. 7. 8 Copying Printing or Scanning This section describes how to print from your computer and scan images to your computer. Note: Make sure that this product is connected to your computer and the necessary software has been installed on your computer. For more information, see the Setup sheet. Note: For more information about scanning, see the Online Reference Guide. Canceling Printing To cancel printing, press the y Stop button. The paper being printed will come out automatically to the output tray. Printing from Your Computer 1. Using the appropriate application on your computer, open the file you want to print. If the Print dialog box appears, click Print to start printing. The selected data will be printed. Note: The above procedure for printing may vary depending on the application you are using. For detailed information on print settings, see the Online Reference Guide. Scanning to Your Computer 1. Follow the steps in "Placing a Photo or Document on the Document Table" on page 7. For more information, see "Starting EPSON Smart Panel" in the Online Reference Guide. Once the image has been scanned, it is saved with the name and format specified in Step 4, to the location specified in step 4. Printing or Scanning 9 English Replacing Ink Cartridges This product monitors the amount of ink left in each cartridge, using an IC chip built into the cartridge. If it detects the ink is low or running out, the ink light will come on or start flashing, or a message will be displayed on your computer to notify you of the ink cartridge to replace. Be sure to always install an ink cartridge into this product immediately following the removal of the current ink cartridge. If the ink cartridge is not installed promptly, the print head may dry out, rendering it unable to print. Be careful not to break the hooks on the side of the ink cartridge when you remove it from its package. Do not remove or tear the label on the cartridge; otherwise, ink will leak. The IC chip accurately monitors the amount of ink used by each cartridge, so even if a cartridge is removed and then later inserted again, all of its ink can be used. However, some ink is consumed each time the cartridge is inserted because this product automatically checks its reliability. This can damage the ink cartridge. Choosing Ink Cartridges You can use the following cartridges with this product. Black ink cartridge Color ink cartridge Black Cyan Magenta Yellow T0441 T0452 T0453 T0454 c Caution: EPSON recommends the use of genuine EPSON ink cartridges. EPSON will not warranty any damage caused by the use of other products. To check when it is time to replace an ink cartridge using the control panel, see "Ink" in "Lights" on page 5. Precautions on Ink Cartridge Replacement Read all of the instructions in this section and "When handling ink cartridges" on page 3 before replacing the ink cartridges. [. . . ] 7. For more details about aligning the print head, see "Aligning the Print Head" in the Online Reference Guide. 14 Maintenance Troubleshooting Using the Error Light and Other Lights to Diagnose Errors You can identify many common problems by checking the Error light and other lights on the control panel. If the product stops working and the Error light is on, use the following table to diagnose the problem, and then try the recommended solution. Note: The problems and solutions listed in this table apply when the product is being used as a stand-alone product. Refer to the Online Reference Guide for detailed solutions on problems that may occur when using the product from a computer. Error light status On Cause Solution Error light status Off/ Ink light on Cause Solution An error has occurred with an ink cartridge. Flashing fast/ "H" flashing in the LED window The adjust lever is set at the ^ position when copying using the control panel. Set the adjust lever to the m position. [. . . ]