User manual EPSON STYLUS PHOTO R300

[. . . ] 1 Where to Find Information Setup This guide will help you set up and begin using your printer. It includes information on setting up your printer and installing the printer software. Photo Print Software Setup This guide provides information on installing EPSON PhotoQuicker, EPSON PhotoStarter, EPSON CardMonitor, EPSON PRINT Image Framer Tool and PIF DESIGNER. Standalone Operation Guide This guide contained on the CD-ROM provides information for direct printing, troubleshooting tips and customer support information. [. . . ] Note: Be sure to properly save the PRINT Image Framer data which named "\EPUDL\AUTOLOAD. USD" to the memory card using the EPSON PRINT Image Framer Tool; otherwise "AUTOLOAD" will not appear on the printer's LCD panel. Select All, Range, Photo number and Individual from the Select Photo menu. Select the type of paper loaded in the printer from the Paper Type menu. Select the size of paper loaded in the printer from the Paper Size menu. Be sure the size of paper loaded matches that specified for the PRINT Image Framer data. The paper sizes available in the Paper Size menu change according to the Paper Type selected, therefore with certain types of paper the size appropriate for the PRINT Image Framer data may not be listed. 54 5. PRINT Image Framer data is located at the bottom of the Layout menu. Note: You can view PRINT Image Framer layout images on the optional Preview Monitor. The printer's LCD panel does not display PRINT Image Framer layout images. Specify the photos that you want to print and the number of copies of each using the Select Photo and Copies menus. Press the Print button to start printing. 55 Digital Camera Direct Printing This printer features the USB DIRECT-PRINT and PictBridge functions, which enables you to print photos directly from a digital camera that also has the USB DIRECT-PRINT function, by connecting the camera to the printer with a USB cable. Operations before connecting Adjusting settings on the digital camera It is necessary to perform the following operations on the digital camera before connecting it to the printer. For more details on the operation of the digital camera, refer to its manual. (Settings will be different, depending on the make of your digital camera. ) Note: Depending on the make of your digital camera, some of the options above may not be available. If the options above are not available on the digital camera, make the selections on the printer's LCD panel. For more details, see the next section. Adjusting settings on the printer's LCD panel If the operations to be performed before connecting are not available on the digital camera, perform them on the printer's control panel. 56 1. Select All, Range, Photo number and Individual from the Select Photo menu. Change the More Options if necessary. Connecting the digital camera to the printer Note: Do not print from the computer or from a memory card inserted in the printer's memory card slot before or while a digital camera is connected to the printer. Do not backup before or while a digital camera is connected to the printer. Make sure that the no error has occurred before a digital camera is connected to the printer. Your printer has two USB connectors, one on the front and one on the back. Although you can connect a USB cable to either, Epson recommends that you use the front-side USB connector for connecting the digital camera and the back-side USB connector for connecting a portable computer or a desktop computer. Connect the USB cable to the printer's external device USB connector. The massage "A digital camera has been connected. " appears for one second on the LCD panel when the connection is established. 57 Printing Print from the digital camera. [. . . ] Press the u or d button to highlight More Options in the Advanced mode, and then press the OK button. 3. Use the d or u buttons and the OK button to make the desired settings. Refer to "Outline of settings" on page 99 for information about Bluetooth settings. 100 The Bluetooth Passkey Setting (Bluetooth PIN) If you select Bonding as the Communication Mode or On as the Encryption setting, the Passkey must be entered into a Bluetooth wireless-capable device before it can communicate with and print from the printer. Press the u or d button to highlight More Options, then press the OK button. [. . . ]