User manual FALMEC EXCELLENCE INSTALLATION SHEET

[. . . ] 5) If plates are not already fitted, insert the appropriate plates with tabs into the lower post on the side of the ring follower (see diagram). [. . . ] 6) Using the two metric round head screws, attach the plates to the bottom of the hood. Then using the metric round head screw carefully attach the plate tab to the post through the pre-drilled hole. 7) Position the two glass panes (short and long sides) against an edge and parallel to the side of hood where the previously fitted plate is located. aSSEMBLY INSTRUCTIONS FOR ASIA HOOD DISH RACK 10) Repat steps 1 , 2 , 4 , 5 , 6 , 7 , 8 , 9 of the previous instructions ignoring the instructions for the chimney. The power cable may be hidden using the supplied cover attached to the post. 11) Having ceiling mounted the dish-rack, insert the two supplied U-profiles into the two holes on the short sides of the dish-rack bottom and screw them on using the two supplied metric round head screws through the holes at the top. [. . . ] The power cable may be hidden using the supplied cover attached to the post. [. . . ]