User manual FRIGIDAIRE FGX831FS1

[. . . ] Push the Push to Start button for 2 seconds, or turn Turn to Start knob to ON, hold for 2 seconds and release. The heat automatically turns off and the load continues to tumble for 5-10 minutes. [. . . ] The WHITES/REGULAR-HIGH HEAT and DELICATEsLOW HEAT temperature settings may be used with any cycle setting. To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber, plastics, or similarly textured, rubber-like materials. This cycle provides up to 100 minutes of drying time at the temperature selection of your choice. Choose an automatic dry cycle whenever possible for accurate drying time. ⷠOpening the door needlessly causes warm air to escape, which prolongs drying time. Install the dryer in an area where the room temperature is at least 45°F (7°C). Select the wash cycle and settings according to type, size, and soil level of each load. The washer will fill with water but will not agitate or spin wiht the lid open. To change a cycle, push in the Cycle Selector knob and turn it clockwise to the desired setting. Push in and turn the Cycle Selector knob clockwise to the desired cycle. For the best results, follow the washing instructions on the fabric care labels The Whites, Colors and Delicates cycles progress through wash agitation, drain and spin with spray rinse, rinse agitation, and a final spin. To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your Laundry Center Owner's Guide before operating this appliance. [. . . ] To conserve energy, the hot wash water is regulated to approximately 100° F. Load Size Turn the Load Size knob to select a water level appropriate for the load size. [. . . ]