User manual FRIGIDAIRE GLTF2940F

[. . . ] to change the selection after the cycle has begun , press Pause/Cancel twice. Heavy The Heavy cycle provides 16 minutes of reversing tumble wash action for heavily soiled sturdy items. Normal The Normal cycle provides 13 minutes of reversing tumble wash action for normally soiled loads, followed by 2 rinses and a final spin. Perm Press Perm Press cycle provides 10 minutes of reversing tumble wash action for cottons and blends with a no-iron finish followed by a Cool Down rinse, 2 additional rinses and a final spin. [. . . ] This cycle is designed for small loads of lightweight, synthetic apparel worn for working out, running, swimming, cycling, tennis and similar activities when removal of light soil and perspiration are important. Reversing tumble wash action will continue for 6 minutes followed by 2 rinses and a final spin. For best results, select a detergent that contains enzymes and the hottest wash water safe for the load. Add a detergant booster, color safe bleach or odor eliminator with the detergent if needed. Fabric softeners reduce wicking and are not recommended for garments made to pull moisture away from the body. bulky This cycle is designed for bulky items such as comforters , blankets , sleeping bags and similar items. Ten minutes of normal reversing tumble wash action are followed by 5 minutes of gentle tumbling, 2 rinses and a final spin. Soak Use this cycle to soak heavily soiled and stained items before washing. Only cold water is available with this cycle because warmer water may set some stains. add half the detergent dose and a detergent booster , if desired , to the detergent compartment. Six minutes of regular reversing tumble action are followed by 30 minutes of occasional tumbling as the load soaks. The water will drain out and the load will spin slowly for a short time. Follow Soak with a complete wash cycle suitable for the load and a full Appropriate wash and rinse water temperatures, final spin speed and soil level settings for each cycle will automatically be indicated when a cycle is selected. to change the preset selections , press the TEMP , SPIN and SOIL buttons to scroll to the desired setting. If a setting is not appropriate for that cycle, the indicator will not light up. NOTE: Pressing any button during operation of the cycle will produce flashing indicator lights and/or beeping with "Err" displayed. To change a setting after the cycle starts, press Pause/ Cancel once before making the adjustment. Changes made to the cycle will automatically be remembered each time the cycle is selected in the future. Wash / Rinse Water Temperatures Select a wash water temperature according to fiber content, colorfastness and soil level. For best results, follow the care label instructions and use the hottest water safe for the fabric. Auto Temperature Control Water temperature selections with this symbol can improve washing performance. Water temperature can be affected by the water heater setting and its distance from the washer, water usage in other parts of the home and seasonally low ground water temperatures in some geographic areas. [. . . ] Extra Rinse occurs before the final rinse when the liquid fabric softner is dispensed. Extra Spin Use this option to add several additional minutes to the final spin at the selected speed. Cycle Signal A signal will sound at the end of the cycle when the cycle signal is selected. For example, High Speed in the Normal cycle is much faster than High Speed in the Handwash cycle. [. . . ]