User manual FUJIFILM FINEPIX 1300

[. . . ] Warning For customers in the U. S. A. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] This setting is then valid for all the prints until the setting is changed. the "ab" button to select "FRAME SET/ RESET". Press the "MENU/OK" button. Use "d " or "c " to select the frame to be specified. 4 !G Up to 99 prints can be specified for each frame, and the maximum number of frames for which prints can be specified on one SmartMedia is 999. G To exit the menu, use the "d" or "c" button to select "[BACK" and then press the "MENU/OK" button. specifying any other settings, first specify whether date is to be shown or not. G If you switch the camera off after selecting "DATE ON", the setting reverts to "DATE OFF". !G To exit the menu, use the "d" or "c" button to select "[BACK" and then press the "MENU/OK" button. 51 PLAYBACK MENU S DPOF FRAME SET/ RESET PLAYBACK MENU S DPOF SET ALL / RESET ALL 3 4 1 2 Use "a" or "b" to specify the number of prints. !G The setting is not saved until you press the "d" or "c" button to move to another frame or press the "MENU/OK" button. G If you do not want a print of the frame, set (reset) the number of prints to "00 SHEETS". When you have completed the settings, always press the "MENU/OK" button to confirm the settings. The total number of prints is displayed on the LCD monitor and you are returned to the menu. The " " icon and the number of prints is displayed for confirmed frames and, if the date has been set, the " " icon is also displayed. Use "a" or "b" to select "SET ALL" or "RESET ALL". G The settings specified for individual frames When you press the "MENU/OK" button, a confirmation screen appears. To proceed with the set or reset operation, press "MENU/OK". The total number of prints is displayed on the LCD monitor and you are returned to the menu. 4 52 To specify DPOF settings for another frame, repeat the procedure from step 2 . !G If you do not press the "MENU/OK" button, after 10 seconds the menu screen reappears. The settings for the last selected frame are discarded. are cancelled. G Prints can be specified for up to 999 frames on the same SmartMedia. If you specify more than 999 frames, the "8" warning appears. !G To exit the menu, use the "d" or "c" button to select !G If "[BACK" and then press the "MENU/OK" button. you reset all the frames, the "TOTAL" display reverts to "00000". 53 5Settings Settings FILE SIZE/ QUALITY SET BEEP SET-UP MODE e The table below explains the camera setting. Display SET [OK] Factory default 1280960 /NORMAL HIGH Explanation Changing the combination of file size and compression ratio for image recording (P. 56). Select English or French as the language used for screen display. 1 2 HIGH / LOW / OFF DATE / TIME SET [OK] RENEW/ CONT. LANGUAGE See the following page for information on using the settings. Set the mode dial to "F". Use the "ab" buttons to select the desired item and then use the "d" and "c" buttons to change and confirm the setting(not including the date /time setting and the file size/quality setting). [. . . ] Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. If water or a foreign object has entered the camera, switch the camera off and then remove the batteries and disconnect the AC power adapter. This can cause a fire or electric shock. WARNING Never attempt to modify or disassemble the camera. (Never open the casing. ) Do not use the camera when it has been dropped or the casing is damaged. [. . . ]