User manual FUJIFILM FINEPIX M603

[. . . ] Getting Ready Basic Photography Advanced Features Photography Advanced Features Playback Settings This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix M603 correctly. Please follow the instructions carefully. Connection BL00168-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 2 Press the "MENU/OK" button to protect the file currently displayed. To finish protecting files, press the "BACK" button. N To stop the procedure mid-way N If the photographed images are very large, protecting or unprotecting all the frames may take some time. If you want to shoot a picture or a movie during the procedure, press the "BACK" button. To then return to protecting or unprotecting all the frames, start the procedure on P. 48 from step 1. 1 0 2 0 48 49 w MODE i DPOF SET FRAME 2 0 1Set the Mode switch to "w". 2Press the "MENU/OK" button to display the menu screen. 1 10 1 50 2 0 1 Press "d" or "c" to display the frame for which you want to specify DPOF settings. 2 Press "a" or "b" to set "YES" for the frame to be printed and then press the "MENU/OK" button or "c". To specify more DPOF settings, repeat steps 1 and 2. 2 Press "d" or "c" to select "i" DPOF. !G "TOTAL" shows the total number of frames prints have been ordered. for which 6 3 1Press "b" to select "DDATE". 2Press "d" or "c" to select "DATE ON" or "DATE OFF". The selected setting is then valid for all frames with DPOF settings. When you have finished the settings, always select "FINISH" and press the "MENU/OK" button. If you press the "BACK" button, no DPOF settings are specified. !G You can only specify one print per frame in the DPOF 1 0 2 0 settings. Note also that you can specify prints for up to 999 frames on the same media. 7 4 1Press "a" to select "OK". 2Press the "MENU/OK" button. Pressing the "MENU/OK" button confirms the DPOF settings. Pressing the "BACK" button returns you to the settings screen 5. 4 Advanced Features Playback 1 0 2 0 See P. 75 for more information on DPOF. Pressing the "MENU/OK" button confirms all the settings. N DPOF settings cannot be changed. N If you select a frame for which DPOF settings have already been specified, the "¥ " message appears. Pressing the "MENU/OK" button erases all of the DPOF settings already specified for each frame. You must then specify the DPOF setting for each frame again. 50 !G Press the "BACK" button to leave the previous settings unchanged. G During playback, check that the "i" icon is displayed for the previous settings. 51 w MODE r RECORDING VOICE MEMOS 2 0 You can add voice memos to still images. h Recording format: WAVE (P. 85) PCM recording format Audio file size: Approx. 2Press "d" or "c" to select the image (still image) to which you want to add a voice memo. [. . . ] Immediately flush the affected area thoroughly with clean water and seek medical treatment. Do not use the charger to charge battery other than those specified here. The charger is designed for Fujifilm NP-60 battery or HR-AA Ni-MH batteries. Using the charger to charge conventional battery or other types of rechargeable battery can cause the battery to leak fluid, overheat or burst. [. . . ]