User manual FUJIFILM FINEPIX S2 PRO

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUJIFILM FINEPIX S2 PRO. We hope that this FUJIFILM FINEPIX S2 PRO user guide will be useful to you.


FUJIFILM FINEPIX S2 PRO : Download the complete user guide (4840 Ko)

You may also download the following manuals related to this product:

   FUJIFILM FINEPIX S2 PRO (2266 ko)
   FUJIFILM FINEPIX S2 PRO (4846 ko)
   FUJIFILM FINEPIX S2 PRO Quick Start (3694 ko)
   FUJIFILM FINEPIX S2 PRO QUICK START GUIDE (3694 ko)

Manual abstract: user guide FUJIFILM FINEPIX S2 PRO

Detailed instructions for use are in the User's Guide.

[. . . ] Getting Ready Basic Photography Advanced Photography Advanced Features Playback OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S2 Pro correctly. Please follow the instructions carefully. Settings Connection BL00140-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] G Switching the camera off does not cancel Flash Exposure Compensation. 66 67 NIKON FLASH UNITS THAT CAN BE USED The Nikon flash models listed in the table below can be used with this camera. In the table, 1 indicates D- or G-type Nikkor lenses (except IX-Nikkor), 2 indicates CPU Nikkor lens other than D- or G-type (except AF Nikkor for F3AF) and 3 indicates non-CPU Nikkor lenses. Flash mode Flash SB-28, SB-28DX (Cordless) TTL 3D Multi- Sensor Multi- Sensor Standard Balanced Fill- Balanced FillTTL Flash1 flash2 Flash u u1 u u1 u u1 u u1 u1 u u u u u u u u u u u u u u u6 u u u6 u u u6 u u u u u u A Non-TTL Auto u u u u u u u u u u u u u u M Manual u u u u u u u u u u u u u u u u u u u u u u u u u u u u Lens 1 2 3 1 Repeating Flash u u u RearCurtain Sync u u u u u u u u u u u u u u u u u u u u Red-Eye Reduction u u u u u u u u u u u u u u u u u u u u Monitor PreFalsh3 u u u u h Even when the optional flash with the AF-Assist Illuminator is attached, AF-Assist Illuminator does not emit light unless the conditions for AF-Assist Illumination are met. h With SK-6 and SB-24 are attached, AF-Assist Illuminators of the camera body and the flash do not emit light. h When the exposure mode is "P" Multi-Programmed Auto, the widest aperture that can be automatically set by the camera is governed by the ISO setting used, as shown in the table below. ISO setting Widest aperture (built-in flash) Widest aperture (optional flash) 100 2. 8 4 160 3. 3 4. 8 200 3. 3 4. 8 400 4 5. 6 SB-27 (Cordless) 2 3 1 u u u u SB-264 (Cordless) 2 3 1 If an aperture that is wider than the controlled aperture is still too dark, the aperture is determined by widest aperture on the mounted lens. SB-25 (Cordless) 2 3 12 SB-24 (Cordless) 3 SB-23, SB-295 SB-21B5 (Cordless) SB-22s, SB-22, SB-20, SB-16B, SB-15 (Cordless) SB-117, SB-14 3 12 3 12 3 12 h When flash exposure compensation is set, "I" appears in the viewfinder without the compensation value. h "¡" in the top display panel and "P" in the viewfinder blink and the shutter cannot be released when the exposure mode is set to "P" and attached flash is not set to TTL Auto Flash. Set the flash mode to TTL, or set the camera's exposure mode to "S", "A" or "M". h To cancel Monitor Pre-Flash when using the SB-28/28DX, 27, 26 or 25, select Spot metering. N Flash attachments made by manufacturers other than Nikon N Use only Nikon flash models. Other units may damage the camera's electrical circuit due to incompatible voltage requirements (not compatible with 250V or higher), electric contact alignment or switch phase. 3 Advanced Photography 1 metering system other than Spot. Also, selecting Manual exposure mode automatically changes the TTL Auto Flash mode to Standard TTL with flash other than SB-28/28DX, 27, 26, 25 and 24 that are equipped with TTL Auto Flash. 3 When Spot metering is selected, Monitor Pre-Flash will not be fired. 5 With the SB-29 and SB-21B, autofocus can only be used when an AF Micro-Nikkor (60 mm, 105 mm, 200 mm and 70-180 mm) is attached. 6 Select exposure mode other than Manual or metering system other than Spot. 7 If TTL mode is used with the SB-11 or SB-14, the SC-23 TTL flash control cord is required for the connection, To use "A" or "M" mode, connect the SB-11 or SB-14 with the SC-13 and SU-2. The SC-11 or SC-15 can also be used to connect the SB-11 or SB-14, but in that case the Ready light in the camera's viewfinder display cannot be used and the shutter speed is not selected automatically. I Accessory shoe (with cover) An optional flash, i. e. SB-28/28DX, SB-27, SB-26, SB-25, SB-24, SB-23 or SB-22s can be attached directly to the accessory shoe of the FinePix S2 Pro without a cord. This accessory shoe is equipped with a safetylock which prevents accidental drop when a flash with a safety-lock pin (i. e. SB-28/ 28DX, SB-27, SB-26, SB-25 or SB-22s) is attached. Always install the accessory shoe cover when you are not using an external flash unit. I Synchronizing terminal (with cap) To use an external flash unit that requires a synchro cord, connect the synchro cord to the synchro cord terminal (with JIS-B locking screw). However, if you mount a Nikon SB-28/28DX, SB-50DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-23, SB-22S or SB-29 on the accessory shoe and then select Rear Synchro mode, do not connect other external flash units to the synchronizing terminal to provide additional flash for the shot. I Notes on using Nikon flash units h Refer to the instructions supplied with the flash unit for details. If your flash unit supports TTL mode and comes with instructions that include a table of camera types, refer to the section for group I cameras. h The synchronized shutter speed when a flash is used is a slow speed of 1/125 sec. h With the SB-26, 25 or 24, flash sync mode set on the Speedlight overrides the setting on the camera body. h If you set the camera's synchro mode to "Red-eye Reduction" or "Red-eye Reduction Slow Synchro" and then use a Nikon external flash unit that has its own red-eye reduction function, the red-eye reduction lamp on the external flash unit fires. 68 69 USING THE FUNCTION MENU WHEN TAKING PICTURES You can use the Function menu to change the quality settings (White Balance, Quality, Resolution, Color, Tone, Sharpness) of saved images and the AF area settings. w WHITE BALANCE 1 2 Switch the camera on and set the camera to Photography mode. [. . . ] This icon indicates that personal injury or material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the information which is to be observed. Triangular icons notify the user of information requiring attention ("Important"). Circular icons with a diagonal bar notify the user that the action indicated is prohibited ("Prohibited"). Filled circles with an exclamation mark notify the user of an action that must be performed ("Required"). Never attempt to modify or disassemble the camera. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FUJIFILM FINEPIX S2 PRO




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUJIFILM FINEPIX S2 PRO will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.