User manual FUJIFILM FINEPIX S8000FD

[. . . ] Getting Ready Using the Camera Advanced Features · Photography · Playback OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S8000fd correctly. Please follow the instructions carefully. · Movie Settings Camera Connection Software Installation Appendices Troubleshooting BL00677-201(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please read the Safety Notes (separate note "Notes and Cautions") and make sure you understand them before using the camera. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] This is normal. Setting the camera to w Playback mode (p. 38) Adjusting volume of movies Volume can be adjusted while playing back movies. VOLUME CAUTION · You may not be able to playback some movie files recorded on other cameras. · To playback movie files on a PC, save the movie file on the Memory Card or internal memory to the PC's hard disk and then playback the saved file. The sound is difficult to hear. 7 SET CANCEL A Press MENU/OK while playing back movie. B Press n or o to adjust the volume. C Press MENU/OK to confirm the setting. Camera starts to playback the movie. 110 [U SET-UP] Using the [SET-UP] menu 3 Change the setting. SET - UP DATE / TIME OPERATION VOL. SHUTTER VOLUME PLAYBACK VOLUME LCD BRIGHTNESS FORMAT 1 Open the [SET-UP] menu. A Press MENU/OK to open the menu. OFF B Press n or o to select [U SET-UP]. C Press q. A Press n or o to select the menu. C Press n or o to change the setting. 2 Change the page. SET - UP DATE / TIME OPERATION VOL. SHUTTER VOLUME PLAYBACK VOLUME LCD BRIGHTNESS FORMAT Settings Settings D Press MENU/OK to confirm the setting. A Press p or q to select the page. B Press o to move to menu item. 111 [U SET-UP] How to use the [SET-UP] menu (p. 111) [SET-UP] menu option Setting Display [CONTINUOUS]/[3 SEC]/[1. 5 SEC]/ [ZOOM (CONTINUOUS)]/ [OFF] [CONTINUOUS]/ [RENEW] [ON]/[OFF] [ON]/[OFF] [30fps]/[60fps] ­ / / / / ­ ­ ­ / OFF / OFF 7 0 ­ Factory default Explanation Sets the way for displaying the check image screen (photograph result) after taking a picture. Specifies whether frame numbers are assigned consecutively from previous numbers or begin again. Sets the volume of the tone emitted when the camera controls are used. Page [ IMAGE DISP. ] [1. 5 SEC] 114 q[ FRAME NO. ] [CONTINUOUS] 115 [ [ [ [ AF ILLUMINATOR] DIGITAL ZOOM] EVF/LCD MODE] DATE/TIME] [ON] [OFF] [30fps] ­ 35 116 ­ 25 ­ ­ 116 117 117 [ OPERATION VOL. ] [ [ SHUTTER VOLUME] PLAYBACK VOLUME] [ LCD BRIGHTNESS] [ FORMAT] 112 How to use the [SET-UP] menu (p. 111) Setting Display Factory default Explanation Page [ ] [ENGLISH] Specifies the language used for screen display. 26 [ [ [ [ [ AUTO POWER OFF] TIME DIFFERENCE] BACKGROUND COLOR] DISCHARGE] VIDEO SYSTEM] [5 MIN]/[2 MIN]/[OFF] N/I ­ ­ [NTSC]/[PAL] [2 MIN] N ­ ­ ­ Sets the time of turning camera off when camera is not used. Resets all the camera settings (other than the [DATE/TIME], [TIME DIFFERENCE], [BACKGROUND COLOR], and [VIDEO SYSTEM]) to the factory default values set at shipment. To reset the camera settings, press p or q to select [OK] and press MENU/OK. 118 118 ­ Settings 138 ­ [ RESET] ­ ­ ­ 113 [U SET-UP] How to use the [SET-UP] menu (p. 111) Z Enlarging images ZOOM (CONTINUOUS) CONTINUOUS) [IMAGE DISP. ] Use this setting to specify the way for displaying the check image screen (photograph result) after taking a picture. Press the MENU/OK to take another picture. Navigation screen (Current displayed image) NEXT SHOOTING [3 SEC]/[1. 5 SEC]: The image appears for about 3 or 1. 5 seconds and is then recorded. CAUTION · The color tones in images displayed when [3 SEC] or [1. 5 SEC] is selected may differ slightly from those in the images actually recorded. · [IMAGE DISP. ] cannot be used when [h LONG PERIOD] (p. 83) is set. A Turn to W or T to zoom in or out of an image. MEMO · When ` quality setting is selected, the image cannot be enlarged. · This function is disabled when setting the continuous shooting. · This function is disabled when selecting . MEMO When a result is displayed with [CONTINUOUS] set, overexposed areas in an image can be checked by pressing D. Intelligent Face Detection Images taken with the Intelligent Face Detection (p. 30). Press (Intelligent Face Detection) to alternate between the displayed faces. Press n, o, p or q to display another part of the image. 114 How to use the [SET-UP] menu (p. 111) [FRAME NO. ] Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin again. [. . . ] · Do not expose the batteries to water, and keep · Ni-MH batteries will deteriorate rapidly if batteries from getting wet or stored in moist overdischarged (e. g. Use the "Discharging rechargeable · Do not attempt to take apart or change the batteries" function provided in the camera to batteries, including battery casings. If a · Do not use batteries that are leaking, deformed, battery can only be used for a short time even after discolored. repeated discharge-charge cycles, it may have · Do not store batteries in warm or humid places. [. . . ]