User manual FUJIFILM FINEPIX F60 FD

[. . . ] BL00781-200(1) E Before You Begin First Steps Owner's Manual Thank you for your purchase of this product. This manual describes how to use your FUJIFILM FinePix F60fd digital camera and the supplied software. Be sure that you have read and understood its contents before using the camera. Basic Photography and Playback More on Photography More on Playback Movies Connections Menus Technical Notes For information on related products, visit our website at http://www. fujifilm. com/products/index. html Troubleshooting Appendix For Your Safety IMPORTANT SAFETY INSTRUCTIONS · Read Instructions: All the safety and operating instructions should be read before the appliance is operated. · Retain Instructions: The safety and operating instructions should be retained for future reference. [. . . ] Choose small apertures (large f-numbers) to bring objects behind and in front of the main subject (the crayon in the center of the illustration at left) into focus. Choose large apertures (small f-numbers) to emphasize the main subject by blurring background and foreground objects. To choose the aperture: AUTO AU OFF 4 Press the selector right to display shooting mode options. 5 Press the selector up or down to highlight an option (pp. 38­40). 6 Press MENU/OK to highlighted option. select the Both modes give you control of exposure compensation (pg. Aperture will be highlighted in the monitor. ISO 200 320 SETTING APE TURE APERTURE 1 2/3 F4. 5 38 Shooting Mode 2 3 Choose an aperture. If the ISO 200 correct exposure can not 3" be achieved at the selected aperture, the SET SE 1 /3 F 2. 8 3" shutter speed will be displayed in red when the shutter button is pressed halfway. Adjust aperture until the correct exposure can be achieved. 2 S SHUTTER PRIORITY AE In this mode, you choose the shutter speed while the camera adjusts aperture for optimal exposure. Choose fast shutter speeds to freeze motion. Choose slow shutter speeds to suggest motion by blurring moving objects. More on Photography If the subject is outside ISO 200 the metering range of the camera, the shutter speed display will show SET SE ---1 /3 F 5. 6 "---". Press the shutter button halfway to measure exposure again. 2 To choose the shutter speed: 1 Press the selector up. Shutter speed will be highlighted in the monitor. ISO 200 1000 SETTING SHUTTER SPEED F4 1 2/3 39 Shooting Mode 2 3 Choose the shutter speed. If the ISO 200 correct exposure can not F3. 6 F3 be achieved at the selected shutter speed, SET SE 1 /3 200 F3 F3. 6 aperture will be displayed in red when the shutter button is pressed halfway. Adjust shutter speed until the correct exposure can be achieved. 2 If the subject is outside the metering range of the camera, the aperture display will show "F--". SET SE F --50 Press the shutter button halfway to measure exposure again. ISO 200 1 2/3 40 Single-Frame Playback To view the most recent picture in the monitor, press the D button. Choosing a Display Format Press the DISP/BACK button to cycle through playback display formats as shown below. 12/ 31/ 12 31 2050 10: 10 00 AM Press the selector right to view pictures in the order recorded, left to view pictures in reverse order. Press and hold the selector to scroll rapidly through your pictures. ANote Pictures taken using other cameras are indicated by a e ("gift image") icon during playback. 100-0001 N ISO 100 More on Playback 12/ 31/ 12 31 2050 1000 F2. 8 10: 10 00 AM Indicators displayed 2050 Indicators hidden 12 / 31 1/13 Sort by date 41 Single-Frame Playback Playback Zoom Select A to zoom in on images displayed in single-frame playback; select B to zoom out. Select B to zoom out Select A to zoom in ANote The maximum zoom ratio varies with image size. Playback zoom is not available with pictures taken at an image size of 3. Intelligent Face Detection If the current picture was taken using Intelligent Face Detection 400 (pg. Press the B button DETECTED FACES ACES once to display a frame around the subject selected with Intelligent Face Detection, then press the B button to zoom in on this subject. You can then use the zoom control to zoom the subject in and out as described above. Red-eye removal can be performed on pictures taken with Intelligent Face Detection (pg. 77). Zoom indicator When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. Navigation window shows portion of image currently displayed in monitor Press DISP/BACK to exit zoom. 42 Multi-Frame Playback To change the number of images displayed, select B when a picture is shown full-frame in the monitor. 100-0001 N Use the selector to highlight images and press MENU/OK to view the highlighted image full frame. In the nine- and hundred-frame displays, press the selector up or down to view more pictures. B Tip: Two-Frame Display Two-frame display can be used to compare pictures taken in A NATURAL & K (dual shot) mode. 12/ 31/ 2050 10: 00 AM 1/1000 F3. 3 Select B to increase the number of pictures displayed to two, nine, or a hundred. More on Playback Select A to reduce the number of images displayed. 43 Sort by Date 1 In single-frame playback, press DISP/ BACK repeatedly until the sort-bydate screen is displayed. The picture displayed in 2050 the single-frame playback remains selected. [. . . ] (a) "Media" means the CD-ROM titled "Software for FinePix" which is provided to you together with this Agreement. (b) "Software" means the software which is recorded on Media. (c) "Documentation" means the operation manuals of Software and other related written materials which are provided to you together with Media. (d) "Product" means Media (including Software) and Documentation collectively. [. . . ]