User manual FUJIFILM Q1 DIGITAL

[. . . ] WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The graphical symbols are located on the bottom of the case. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please read the Safety Notes ( p. 65) and make sure you understand them. 2 EC Declaration of Conformity We Name : Address : Fuji Photo Film (Europe) G. m. b. H. Heesenstrasse 31 40549 Dusseldorf, Germany declare that the product Product Name : FUJIFILM CAMERA DIGITAL Q1 is in conformity with the following Standards Safety : EN60950 EMC : EN55022 : 1998 Classe B EN55024 : 1998 EN61000-3-2 : 1995 + A1:1998 + A2:1998 following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and 93/68/EEC) and Low Voltage Directive (73/23/EEC). Dusseldorf, Germany Place 20. [. . . ] After the USB driver has been installed, restart your computer. The PC Camera Driver is also installed. Macintosh OS 8. 6 computers Mac OS 8. 6 users must install a USB driver. For Mac OS 9. 0 or higher, the computer will automatically recognize the camera. Follow the on-screen instructions to complete the installation and restart your computer. 40 Step 2: Connecting the Camera to Your Computer The images and video clips on an xD-Picture Card will be downloaded into your computer hard disk when the xD-Picture Card is inserted; otherwise, the images and video clips on the internal memory will be downloaded. Connect one end of the USB cable to an available USB port on your computer. 2. Connect the other end of the USB cable to the USB connector on the camera. 3. "DISK DRIVE" is displayed on the LCD monitor. Mac users: Double-click the [untitled] or [unlabeled] disk drive icon on your desktop. The volume label may vary depending upon whether you use internal camera memory, or a memory card. Note: When transferring images to the computer, there is no need to install any batteries into the camera. The camera will automatically power on when connected to the computer via USB cable. Do not insert/remove the xD-Picture Card during USB cable connection. 41 Step 3: Downloading Images and Video Files The images and video clips on an xD-Picture Card will be downloaded into your computer hard disk when the xD-Picture Card is inserted; otherwise, the images and video clips on the internal memory will be downloaded. Make sure that the camera is connected to your computer and [DISK DRIVE] is selected. This [removable disk] is actually the memory (or memory card) in your camera. Typically, the camera will be assigned drive letter "e" or higher. * Copy & Paste or Drag-N-Drop images and video clips to a folder on your computer. Windows Open the [removable disk] and subsequent folders by double clicking on them. Select the images that you want, then choose [Copy] from the [Edit] menu. Open the destination location (folder) and choose [Paste] from the [Edit] menu. You may also drag and drop image files from the camera to a desired location. Macintosh Open the [untitled] or [unlabeled] disk icon, and the destination location on your hard disk. Note: Memory card users may prefer to use a memory card reader (highly recommended). Make sure that you have installed movie playback software before playing back video clips in your computer. 42 USING THE CAMERA AS A PC CAMERA Your camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family. To use the camera as a PC camera, follow these steps: Step 1: Installing the PC camera driver (same as USB driver) Step 2: Connecting the camera to your computer Step 3: Running your application software (i. e. Windows NetMeeting) Note: Video conferencing (or video editing) software is not included with the camera. This mode is not supported for Mac. General System Requirements for Videoconferencing To use the camera for videoconferencing, your computer system must include: Microphone Sound card Speakers or headphones Network or Internet connection Step 1: Installing the PC Camera Driver The PC-camera driver included on the enclosed CD-ROM is exclusively for Windows. [. . . ] Circular icons with a diagonal bar notify the user that the action indicated is prohibited ("Prohibited"). Filled circles with an exclamation mark notify the user of an action that must be WARNING Do not allow water or foreign objects to enter the camera. If water or foreign objects get inside the camera, switch the camera off, remove the batteries. (Never open the casing. ) Do not use the camera when it has been dropped or the casing is damaged. [. . . ]