User manual GAGGENAU AH 900-161

[. . . ] The appliance offers you a number of advantages: ­ effective extraction thanks to the so-called "Coanda effect" ­ low operating noise To ensure that you will be able to use this appliance in all its diversity, read through the operating and assembly instructions conscientiously before operating it for the first time. The instructions contain important notes on use, installation and maintenance of the appliance. On the following page you will find important notes on safety and operation. These will serve to ensure your personal safety and the lasting value of your appliance. [. . . ] The grease filter absorbs the greasy components in the kitchen vapours. The "Coanda effect" Kitchen vapours are extracted even better with the "Coanda effect". By means of an additional motor, kitchen vapours are passed swiftly and effectively into the hood's extraction zone. An additional fan on the front edge of the kitchen extractor hood generates an air stream that is diverted around a cylinder towards the rear. This ensures that kitchen vapours are routed completely into the extractor hood's filter area (see Fig. Operation 3. 1 Switching on and off Switching on ­ Turn the "Ventilation level" control knob to the ventilation level you require (Fig. 7 Switching off 0 0 1 2 ­ Turn the "Ventilation level" control knob to the 0 position (Fig. To do this, turn the "Light" control knob to the (Light) position. Fig. 8 Switching on the Coanda level 0 0 1 2 3 ­ Turn the "Ventilation level" control knob to the level you require. ­ The level you have set and the Coanda level symbol appear on the display (Fig. Note: You can change to any ventilation level, and the Coanda level remains set. Note: The activated charcoal filter is not included in the scope of delivery of the hood. If used once daily, the activated charcoal filter must be replaced approximately once to twice every year. Press out the two tabs in the downward direction and remove the activated charcoal filter from the hood in the downward direction (see Fig. 14 Clean the stainless steel parts of the extractor hood with mild rinsing detergent and apply stainless steel care agent to the metal surfaces using a soft cloth. Do not use any strong or caustic cleaning agents or brushes and abrasive cleaner. Use commercially available window cleaner and apply it to a soft, moist cloth. Do not use any cleaning agent as it might be agressive to the inscription markings. 10 5. Maintenance First disconnect the appliance from the mains before carrying out any repairs. If the power supply is in proper working order, but the appliance is nevertheless not functioning, then please contact your specialist dealer or your responsible Gaggenau after-sales service. Repairs must only be carried out by authorised specialists, thus ensuring the safety of the appliance. Lamp replacement Caution: Disconnect the power supply before replacing lamps! [. . . ] ­ Using the drilling template, drill the 6 holes for the hood (area I of the drilling template) and the two holes for suspending the chimney (area II of the drilling template). In the top two securing holes for the hood, fix the two hooks e with the countersunk screws d. Note: Pay attention to any special accessories that you may have to fit. ­ Unscrew the two black plates on the left and right of the chimney. [. . . ]