User manual GAGGENAU AH600790

[. . . ] Operating and assembly instructions AH 600-790 Extractor hood 0 0 1 2 3 AH 600-790 Preface Safety notes 1. Important notes 1. 1 For your safety 1. 2 Operating for the first time 1. 3 About use 2. Structure and operating principle 2. 1 Structure of the appliance 2. 2 Accessories/special accessories 2. 3 Operating principle 3. Assembly instructions 6. 1 Technical data 6. 2 Installation Page 3 Page 4-5 Page 4 Page 5 Page 5 Page 6-7 Page 6 Page 6 Page 7 Page 8-9 Page 8 Page 9 Page 10-11 Page 12 Page13-19 Page 13 Page 14-19 1 Preface With your new extractor hood, working in the kitchen will be even more fun. [. . . ] Operation 3. 1 Switching on and off Switching on ­ Turn the "Ventilation level" control knob to the ventilation level you require (Fig. 7 Switching off 0 0 1 2 ­ Turn the "Ventilation level" control knob to the 0 position (Fig. To do this, turn the "Light" control knob to the (Light) position. Fig. 8 Switching on the Coanda level 0 0 1 2 3 ­ Turn the "Ventilation level" control knob to the level you require. ­ The level you have set and the Coanda level symbol appear on the display (Fig. Note: You can change to any ventilation level, and the Coanda level remains set. 9 ­ Press the "Coanda level" key or turn the "Ventilation level" knob to the 0 position. 8 3. 2 Special functions 0 0 1 2 3 Intensive level You should select the intensive level when browning and frying in an open pan. After a few minutes, the appliance switches back automatically to the previously selected ventilation level. The appliance is now operated at the intensive level for a few minutes and then switches off automatically. Ending the intensive level prematurely: ­ Turn the "Ventilation level" knob to the 0 position or ­ turn the "Ventilation level" knob to any level or ­ press the intensive level key once again. Fig. 11 After-running Switching on: ­ Press the (After-running) key. ­ The (After-running) symbol and ventilation level 2 light up on the display (Fig. or ­ Turn the "Ventilation level" control knob to any level. If used once daily, the activated charcoal filter must be replaced approximately once to twice every year. Press out the two tabs in the downward direction and remove the activated charcoal filter from the hood in the downward direction (see Fig. 14 Clean the stainless steel parts of the extractor hood with mild rinsing detergent and apply stainless steel care agent to the metal surfaces using a soft cloth. Do not use any strong or caustic cleaning agents or brushes and abrasive cleaner. Use commercially available window cleaner and apply it to a soft, moist cloth. Do not use any cleaning agent as it might be agressive to the inscription markings. 11 5. Maintenance The appliance must be disconnected from the power supply during all repair work. If the power supply is functioning correctly, but your appliance still does not work, please contact your Gaggenau dealer who will provide you with the address and telephone number of your nearest manufacturer's authorized service agent or contact Gaggenau USA on (800) 828-9165. Repairs may only be carried out by authorised technicians, in order to guarantee the safety of the appliance. [. . . ] Adjust the suspended element with the recessed head screw and align the hood using a spirit level (Fig. 19). 448 (175/8") 137 (513/32") 270 (105/8") 625 (245/8") min. 19 16 ­ Secure the hood to the wall using the 4 screws b with shims c (Fig. 20 ­ Join the chimney shoe with the chimney base using the 6 screws (3. 5 x 9. 5 mm) (Fig. [. . . ]