User manual GAGGENAU CK171614

[. . . ] When connecting electrical appliances and devices in the proximity of cooking surfaces and ovens, make sure that connecting cables do not become jammed under the hot oven door or come into contact with hot cooking surfaces. As the user, you yourself are responsible for maintenance and proper use in the household. Note: to avoid jeopardising the electrical safety of the appliance, it is forbidden to use high-pressure or steam jet cleaning devices. Isolate the appliance from the mains during every maintenance operation. [. . . ] The serial number of the appliance can be found on the quality control slip which is included with these instructions. This quality control slip should be kept, for guarantee reasons, together with your operating and assembly instructions. Read through these instructions attentively before operating your appliance for the first time. Thoroughly clean the appliance and accessories before using them for the first time. This will eliminate any 'newness' smells and soiling (see chapter "Cleaning and care"). Operation of the appliance must be discontinued immediately if improper use produces cracks, breaks or flaws on the cooking surface, with the result that live parts can come into contact directly or indirectly with seeping liquid or if there is a risk of injury. Inform after-sales service! 1. 3 About use ­ The appliance is intended solely for use in the household and must not be put to any other uses. ­ Place a cooking vessel on the corresponding hotplate before operating it. Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should correspond to the size of the hotplate. If a problem has nothing to do with the power supply, please contact your specialist dealer or your responsible Gaggenau after-sales service. Cooking zone 4 (front right) has a combination function to turn the small round cooking zone into a large round cooking zone. Switching on the combination function: Turn the corresponding control knob to the right beyond 9 (EE 214, SP 212) or 12 (SP 384) to the or (Combination) symbol and then back to the cooking level you require. Fig. 7 Switching off: Turn the corresponding control knob to the left to the 0 position. Note: The control knobs for cooking zones with the combination function cannot be switched from the combination position directly to the 0 position. Settings table (EE 214, SP 212) Cooking levels 0 1 2 3 4 5 6 7 8 9 OFF Keeping warm Melting, soaking Thawing, warming up Cooking, Continued cooking Steaming, stewing Stewing Baking and gentle roasting Roasting Deep frying, bringing to the boil The values in the settings table serve only as a guide because heat levels required will depend on the nature and condition of the food and on the size and fillings of pots and pans used. Only switch to the highest cooking level for bringing to the boil and browning. Cleaning and care Please thoroughly clean the appliance before operating it for the first time and after every use. The frame of the hob and the cooker's control panel or the control console must only be cleaned using a soft, dry cloth and light soapy solution. Do not use any commercially available stainless steel cleaners as these may be aggressive to the printed markings. Use commercially available window cleaner and apply it to a soft, moist cloth. Remove baked-in food remainders and coarse dirt with our small scraper (nr. : 087670). Clean the cooking surface regularly with the Gaggenau cooker cleaner (nr. : 098690). [. . . ] If you are not successful in remedying the fault with the aid of the list below, then contact your Gaggenau after-sales service. Fault Appliance cannot be switched on. The cooking zone no longer lights up bright red although you have not changed any switch settings. The food you are cooking needs a relatively long time to become hot. Possible cause Mains plug removed or domestic fuse has tripped. This mechanism protects the cooking surface against overheating and serves to keep the supply of heat even. [. . . ]