User manual GAGGENAU CK260604

[. . . ] Operating and Assembly Instructions CK 260-604 Glass-ceramic hob with Superquick cooking zones 0 1 9 1 0 9 1 0 9 1 0 9 3 7 3 7 3 7 3 7 CK 260-604 Preface Important safeguards 1. Important notes 1. 1 For your safety 1. 2 Operating for the first time 1. 3 About use 2. Structure and operating principle 2. 1 Structure 2. 2 Operating principle 2. 3 Energy saving tips 3. Maintenance 5. 1 Overview 5. 2 Remedying slight malfunctions yourself 6. [. . . ] ­ Read through these instructions attentively before operating your appliance for the first time. ­ Remove the packaging from the appliance and dispose of it properly. Pay attention to the fact that there are accessories in the base of the packaging. ­ Thoroughly clean the appliance and accessories before using them for the first time. This will eliminate any 'newness' smells and soiling (see chapter entitled "Cleaning and care"). ­ Tip: If you have a glass insurance, we recommend that you have your new glassceramic cooking range included. ­ Operation of the appliance must be discontinued immediately if improper use produces cracks, breaks or flaws on the cooking surface, with the result that live parts can come into contact directly or indirectly with seeping liquid or if there is a risk of injury. ­ Before operating the appliance for the first time, make sure that the mains connection is in proper working order. 5 1. 3 About use ­ The appliance is intended solely for use in the household and must not be put to any other uses. ­ Place a cooking vessel on the corresponding hotplate before operating it. Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should correspond to the size of the hotplate. If a problem has nothing to do with the power supply, please contact your specialist dealer or your responsible Gaggenau after-sales service. ­ Built-in temperature protection prevents overheating of the appliance and of build-in furniture. ­ Use of aluminium kitchenware or stainless steel kitchenware with aluminium bases may produce mother of pearl-coloured stains on your cooker. These will not have a detrimental effect on functioning of the cooking surface, though. ­ The glass-ceramic cooker additionally features an individual residual heat display. The residual heat display indicates that, after switching off, a cooking zone has still not cooled down to such an extent that it can be safely touched. It lights up in the residual heat display panel as a red dot for each cooking zone. Structure and operating principle 2. 1 Structure 1 SuperQuick cooking zone Ø 145 mm / 511/16" (1200 W) 2 SuperQuick cooking zone Ø 180 mm / 71/16" (1800W) 3 SuperQuick cooking zone Ø 145 mm / 511/16" (1200 W) 4 Control knob for front right cooking zone 5 Control knob for rear right cooking zone 6 Operating indicator 7 Display panel for residual heat 8 Control knob for rear left cooking zone 9 Control knob for front left cooking zone 10 SuperQuick cooking zone Ø 180 mm / 71/16" (1800 W) The glass-ceramic range features SuperQuick cooking zones. These cooking zones possess good heat distribution properties and light up red while heating up. The cooking zones are controlled electronically and are switched on and off during operation. This is done to protect the glass plate against overheating and to ensure a uniform supply of heat from the hotplate to the saucepan. [. . . ] by installing an intermediate shelf that can only be detached using a tool. The distance between the intermediate shelf and the worktop in which the range is recessed must be at least 60 mm (23/8"). ­ Note : when installing a shelf, observe a distance of at least 50 mm (2") from the bottom edge of the housing trough to the shelf or the next combustible item of furnishing. ­ If all poles of the appliances cannot be isolated from the mains by removing an accessible plug (of a permanent connecting lead), an isolating device with a contact gap of at least 3 mm must be installed (e. g. [. . . ]