User manual GAGGENAU RF 200-202

[. . . ] The amount of refrigerant in your appliance is indicated on the rating plate inside the appliance. If the power cord of this appliance is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person. Improper installations and repairs may put the user at considerable risk. –¯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ Never use electrical appliances inside the appliance (e. [. . . ] –¯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ Built-under appliance Interior fittings (depending on model) Bag containing installation materials Operating instructions Installation manual Customer service booklet Warranty enclosure Information on the energy consumption and noises 20 Ventilation The refrigeration unit is ventilated only via the ventilation grille in the base. Otherwise the refrigeration unit must work harder, increasing the power consumption. Connecting the appliance After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance (see chapter “Cleaning the appliance”). Installation location Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to direct sunlight nor near a heat source, e. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances to a heat source: Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. Connect the appliance to 220-240 V/50 Hz alternating current via a correctly installed socket with protective conductor. For appliances operated in non-European countries, check whether the stated voltage and current type match the values of your mains supply. You can order accessories from customer service for installation on the side walls. E - Nr FD - Nr 21 Getting to know your appliance These operating instructions refer to several models. 1 0 5 3 8 4 5 6 9 1 2 3 4 5 6 7 8 9 Light switch Temperature controller/light Glass shelf in the refrigerator compartment Pull-out container Vegetable container Ventilation opening Shelf for butter and cheese Egg rack Shelf for large bottles 22 1 2 7 Switching the appliance on Turn the temperature controller from position “0”. Operating tips The refrigerator compartment temperature rises: We recommend: ▯ ▯ ▯ ▯ Perishable food should not be stored above +4 °C. Select a higher setting only temporarily, when the door is frequently opened or large quantities are placed in the refrigerator compartment. –¯ ▯ ▯ if the appliance door is opened frequently, if large quantities of food are placed in the refrigerator compartment, if the ambient temperature is high. Setting the temperature Turn temperature controller to the required setting. Refrigeration capacity The temperature in the refrigerator compartment may rise temporarily if large amounts of food or a lot of drinks are placed inside. Therefore the temperature controller should be set to a higher setting for approx. Usable capacity Information on the usable capacity can be found inside your appliance on the rating plate (see diagram at chapter “Customer service”). When the controller is at a medium setting, the temperature drops to approx. Higher settings lower the temperature in the refrigerator compartment. [. . . ] The arrangement of the fittings does not affect the energy rating of the appliance. –¯ ▯ ▯ ▯ 28 Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee!The refrigerating unit is switching on more frequently and for longer. [. . . ]