User manual GAGGENAU VG 231 AU

[. . . ] Important notes Page 5-6 1. 1 For your safety Page 5 1. 2 Operating for the first time Page 5 1. 3 About use Page 6 2. Structure and operating principle Page 7-8 2. 1 Structure Page 7 2. 2 Special accessories Page 7 2. 3 Operating principle Page 8 3. Maintenance Page 11 5. 1 General Page 11 5. 2 Remedying slight malfunctions yourself Page 11 6. Practical tips Page 13-14 7. 1 The wok and accessories Page 13 7. 2 Cooking in the wok Page 13 7. 3 Recipes Page 14 8. [. . . ] 6): Fully turn the control knob to the left to the 0 position on the left. Fig. 7 Please thoroughly clean the appliance before operating it for the first time and after every use. During power failures, the appliance can also be lit with a match or lighter. If the power supply is functioning correctly, but your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Repairs may only be carried out by authorised technicians, in order to guarantee the safety of the appliance. Unauthorised tampering with the appliance will invalidate any warranty claims. If flames are ever yellowish or noisy or if the gas does not ignite within the period specified under "Turning on", abnormal operation is indicated. In that case call: Sampford & Staff Pty Ltd, 421 Smith Street, Fitzroy, Vic. Service Centres in other States: Y (03) 9418 5888 Melbourne Y (02) 9331 8888 Sydney Y (08) 8296 0902 Adelaide Y (07) 3358 3000 Brisbane Y (08) 9240 1288 Perth The appliance must be disconnected from the power supply during all repair work. Only ever use original spare parts. 5. 2 Remedying slight malfunctions yourself Fault The burner does not ignite after several attempts. Check whether there are food remainders between the ignition electrode and the burner cover. Check whether the burner is dry and clean. The gas flame goes off after ignition. The cooking ring burner's electrical igniter is no longer functioning. Technical data / Table Technical data (gas) Burners: super strong burner Level 1 low flame < 1 MJ (0. 28 kW) Level 2 full inner flame < 2 MJ (0. 56 kW) Level 3 small outer flame plus level 2 full inner flame 5. 5 MJ (1. 53 kW) Level 4 full flame 18 MJ (5. 0 kW) Gas connection: R 1/2'' union nut for R 1/2'' bracket to DIN 1999, conical-cylindrical Technical data, gas Countries AU AU Technical data (electrical) Rated consumption Voltage Frequency 0. 8 W 220-240 V 50-60 Hz Technical modifications reserved. Gas family Gas type Pressure Outer burner, full Outer burner Bypass Inner burner, full Inner burner Bypass Air gap adj / outer [mm] Air gap adj / inner [mm] Power Consumption 12 Natural gas N 1. 0 kPa (10 mbar) 1. 95 0. 88 Nr. 10 0. 51 2 open 18 MJ (5 kW) 0. 55 m3/h Propane gas X 2. 75 kPa (27. 5 mbar) 1. 10 A 0. 57 Nr. Practical tips 7. 1 The wok and accessories (not included in the scope of delivery) ­ The "original wok" is the ideal wok for your gas cooker. ­ The wok looks like a hollow semisphere with a long handle or wooden handle. The thin steel passes the heat swiftly to the inside, but soon cools down again as soon as the flame is set to a lower setting. On it, you can steam ingredients, you can allow deep fried foods to drip or you can keep browned foods warm. ­ Use the chan (rounded spatula) or the wooden pan reversing implement. ­ Use the strainer to lift deep fried foods from the fat or large pieces out of a sauce. ­ You can use bamboo baskets for steaming. 7. 2 Cooking in the wok You can fry, steam, deep fry, stew and cook normally. Ingredients cut into small pieces are cooked as briefly as possible under strong heat and constant stirring. [. . . ] Adjust the air gap according to the table entitled "Air gap adjustment" for the outer burner. Unscrew the injector screw 5 (SW 12) and, using a small screwdriver, remove the nozzle 6 from the injector 7. Install the nozzle according to the new gas type (see data in the nozzle table). To do this, fit the nozzle 6 on the front of the injector screw 5 and screw both of them into the injector. [. . . ]