User manual GAGGENAU VL051907

[. . . ] Operating and assembly instructions VL 051-907 Automatically extendible hob ventilator 3 VL 051-907 Preface 1. Important notes 1. 1 For your safety 1. 2 Operating for the first time 1. 3 About use 2. Structure and operating principle 2. 1 Structure of the appliance 2. 2 Control panel 2. 3 Accessories 3. Assembly instructions 6. 1 Technical data 6. 2 Important notes 6. 3 Electrical connection 6. 4 Installation next to a gas hob 6. 5 Installation Page 3-4 Page 3 Page 4 Page 4 Page 5 Page 5 Page 5 Page 5 Page 6 Page 7-8 Page 9 Page 10-15 Page 10 Page 10 Page 11 Page 11 Page 12-15 1 Preface With your new hob ventilator, working in the kitchen will be even more fun. [. . . ] Do not use any cleaning agent as it might be agressive to the inscription markings. Grease filter cleaning The grease filter indication symbol lights up on the operating panel after around 30 hours of operation. Illumination of this symbol signals to you that the grease filters have to be cleaned. You can clean the metal grease filters in a dishwasher at a maximum temperature of 65°C. To do this, place the grease filters in the dishwasher in such a way that it is cleaned completely. Proceed as follows: ­ Turn the "Height adjustment" control knob to the right to extend the boom slightly. ­ Turn the two retaining wires up and remove the grease filter from the appliance. ­ Turn the control knob to the position (grease filter indication). Only clean the grease filter after the appliance has cooled down. 7 Swivel arm cleaning If the swivel arm gets very dirty, it can be dismantled for cleaning. You can clean the swivel arm in a dishwasher at a maximum temperature of 65°C. Proceed as follows: ­ Turn the "Height adjustment" control knob to the right to extend the boom slightly. ­ Turn up the two retaining clips and remove the grease filter from the appliance. ­ Place the two included protective covers on the tube opening to make sure that no small parts will fall into the suction pipe. Only clean the swivel arm after the appliance has cooled down. 8 5. Maintenance First disconnect the appliance from the mains before carrying out any repairs. If the power supply is in proper working order, but the appliance is nevertheless not functioning, then please contact your specialist dealer or your responsible Gaggenau after-sales service. To this end, have a look at the rating plate, which is included with the operating and assembly instructions. Repairs must only be carried out by authorised specialists, thus ensuring the safety of the appliance. Improper tampering will render all warranty claims null and void. 9 6. Assembly instructions 6. 1 Technical data Rating: 260 W Weight: 19 kg A fan module is needed for suction extraction. Adequate ventilation of the room must be ensured whenever a hob ventilator is operated simultaneously with devices that are operated with non-electrical energy. Official regulations must be observed with regard to removal of the exhaust air. [. . . ] Stick the included sealing tape onto the base plate of the VL 051 around the pipe connection piece. ­ Place the VL 051 with the pipe connection piece directly in one of the openings of the AS 081. In the event of a greater distance between VL 051 and AS 081, you can bridge the space between them with a flexible aluminium pipe (DN 125 mm). ­ Make sure that the engaging lugs on the appliance lie exactly on the clamping springs. [. . . ]