User manual GARMIN G500H PILOT'S GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN G500H. We hope that this GARMIN G500H user guide will be useful to you.


GARMIN G500H PILOT'S GUIDE: Download the complete user guide (20590 Ko)

You may also download the following manuals related to this product:

   GARMIN G500H REFERENCE GUIDE (5386 ko)

Manual abstract: user guide GARMIN G500HPILOT'S GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] This manual reflects the operation of System Software version 4. 00, or later. Some differences in operation may be observed when comparing the information in this manual to later software versions. Garmin International, Inc. , 1200 East 151st Street, Olathe, KS 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] Turn the small MFD knob to adjust the Brightness value. Figure 3-83 External Video Brightness Adjustment 3) After selecting the desired setting, turn the large MFD knob to highlight the next value or press the small MFD knob to exit editing. Contrast Adjustment Sec 4 Hazard Avoidance Sec 7 Symbols Sec 6 Annun. & Alerts Sec 5 Additional Features Sec 3 MFD 1) While viewing the External Video page and the desired Video source, press the Setup soft key. Turn the small MFD knob to adjust the Contrast value. Figure 3-84 External Video Contrast Adjustment Sec 8 Glossary Appendix A Appendix B Index 3) After selecting the desired setting, turn the large MFD knob to highlight the next value or press the small MFD knob to exit editing. Saturation Adjustment 1) While viewing the External Video page and the desired Video source, press the Setup soft key. Turn the small MFD knob to adjust the Saturation value. 3-56 Garmin G500H Pilot's Guide 190-01150-02 Rev. B Foreword Figure 3-85 External Video Saturation Adjustment Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance 3) After selecting the desired setting, press the small MFD knob to exit editing. 3. 4. 5. 5 Restore Defaults The Restore Defaults selection will return the Brightness, Contrast, and Saturation values to their original settings. 1) While viewing the External Video page, press the MENU key. Figure 3-86 Restore Video Defaults Menu Selection Sec 5 Additional Features 2) "Restore Defaults" will be highlighted. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index 190-01150-02 Rev. B Garmin G500H Pilot's Guide 3-57 3. 4. 6 Foreword Position Reporting (optional) Position Reporting is a system which collects system variables and transmits them over the Iridium® Satellite Network at a given interval through the GSR 56. 3. 4. 6. 1 Status The Status window shows the time until the next data transmission and the status of the reporting system. NOTE: Waypoint The GSR 56 does not report its serial number until 90 seconds after power up of the GDU. As a result, for that period, the product info for the GSR 56 will show "Waiting. " Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Sec 1 System Time Until Transmit The Time Until Transmit field is a countdown timer that shows the time until the next data transmission. This field is blank when the aircraft is on the ground. Countdown Time Until Transmit Figure 3-87 Position Reporting Time Until Transmit Sec 5 Additional Features Sec 6 Annun. & Alerts Position Reporting Status Position Reporting will be enabled when the aircraft is in the air. Status Idle Initializing Transferring Unavailable Description The reporting system is not using the GSR 56 for reporting at this time. The GSR 56 is currently not usable by the reporting system. Table 3-5 Position Reporting Status Appendix A Sec 8 Glossary Sec 7 Symbols 3. 4. 6. 2 Standard Report Type When the Standard reporting type is used, the Position Reporting Period may be set to Off or intervals of 2 to 60 minutes. The Automatic Position Reporting Period can be set to Off or periods of 2 minutes. 3-58 Garmin G500H Pilot's Guide 190-01150-02 Rev. B Appendix B Index 1) Turn the large MFD knob to reach the Aux page group. 3) Turn the small MFD knob to highlight Standard and then press the ENT key. Foreword Sec 1 System Sec 2 PFD Sec 3 MFD Figure 3-88 Select Standard Reporting 4) The Position Reporting Period type will now be selected. Turn the small MFD knob to highlight "Off" or "Automatic" and then press the ENT. 5) Turn the small MFD knob to select the reporting frequency. Sec 4 Hazard Avoidance Sec 5 Additional Features Sec 6 Annun. & Alerts Sec 7 Symbols Figure 3-89 Select Standard Reporting Period Frequency 6) Press the small MFD knob to exit editing. Sec 8 Glossary Appendix A 7) With the Standard Reporting Type, the reporting period may be manually overridden by pressing the SEND soft key to send data. SEND Soft Key Label SEND Soft Key Figure 3-90 Press SEND to Override the Reporting Period Appendix B Index 190-01150-02 Rev. B Garmin G500H Pilot's Guide 3-59 Automatic Flight Following (AFF) Foreword Sec 3 MFD Sec 2 PFD Sec 1 System 1) While viewing the Position Reporting function, press the small MFD knob to select the Report Type. 2) Turn the small MFD knob to highlight "AFF" and then press the ENT. Figure 3-91 Select Automatic Flight Following (AFF) Reporting Type Sec 4 Hazard Avoidance Sec 6 Annun. [. . . ] 5) Use the large MFD knob to select the AUX page group and then small MFD knob to reach the System Status Page. 6) Press the DBASE soft key to place the cursor in the "DATABASE" window. 7) Turn the small MFD knob to scroll through the list and check that all databases are current and there are no errors. If a database is highlighted in yellow, it is either expired or the G500H can not determine the date. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN G500H




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN G500H will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.