User manual GARMIN GBT 10 BENNETT TRIM TAB ADAPTER INSTALLATION AND CONFIGURATION INSTRUCTIONS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN GBT 10 BENNETT TRIM TAB ADAPTER. We hope that this GARMIN GBT 10 BENNETT TRIM TAB ADAPTER user guide will be useful to you.


GARMIN GBT 10 BENNETT TRIM TAB ADAPTER INSTALLATION AND CONFIGURATION INSTRUCTIONS: Download the complete user guide (819 Ko)

Manual abstract: user guide GARMIN GBT 10 BENNETT TRIM TAB ADAPTERINSTALLATION AND CONFIGURATION INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

[. . . ] Compare the contents of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately. Product Registration Help us better support you by completing our online registration today. Keep the original sales receipt, or a photocopy, in a safe place. Contact Garmin Contact Garmin Product Support if you have any questions while using your GBT 10 adapter. In the USA, go to www. garmin. com/support, or contact Garmin USA by phone at (913) 397. 8200 or (800) 800. 1020. [. . . ] Connecting the GBT 10 adapter wires to the connections farthest from the SHLD connection will interfere with the operation of the Bennett TPI. GBT10InstallationandConfigurationInstructions Wiring the GBT 10 Adapter Directly to the Sensors on the Trim Tabs You can wire the adapter directly to the Bennett trim tab sensors where the trim tabs are installed. Wire the GBT 10 adapter to the sensors according to the following table. GBT 10 Adapter Wire Blue White Yellow Drain Red Bennett Trim Tab Sensors Port sensor wire 1** Port sensor wire 2** Starboard sensor wire 1** Sensor drain wires Starboard sensor wire 2** **When wiring the GBT 10 adapter directly to the trim tab sensors, the connection order of the GBT 10 adapter port wires (blue/white) and the GBT 10 adapter starboard wires (yellow/red) to the two wires on the respective trim tab sensor is not important. notiCe: After connecting the adapter to the Bennett TPI or to the Bennett trim tab sensors, cover any exposed wires with heat-shrink tubing. Connecting the GBT 10 Adapter to a NMEA 2000 Network After you have connected the GBT 10 adapter to the Bennett TPI or to the Bennett trim tab sensors, connect it to the existing NMEA 2000 network on your boat. If you do not have a NMEA 2000 network on your boat, you must build one. For more information on NMEA 2000 and to purchase additional connectors and cables, go to www. garmin. com. Connecting the GBT 10 Adapter to an Existing NMEA 2000 Network GBT10adapter NMEA000device(notincluded) Dropcable(optional-notincluded) T-connector(oneincluded) ExistingNMEA000network To connect the GBT 10 adapter to your existing NMEA 2000 network: 1. Determine where to connect the GBT 10 adapter to your existing NMEA 2000 backbone. To extend the NMEA 2000 backbone, connect a NMEA 2000 backbone extension cable to the side of the disconnected T-connector. Add the included T-connector for the GBT 10 adapter to the NMEA 2000 backbone by connecting it to the side of the disconnected T-connector. Connect the NMEA 2000 connector on the GBT 10 adapter to the T-connector added in step 3. GBT10InstallationandConfigurationInstructions 5. (Optional) If the GBT 10 adapter cannot connect directly to the NMEA 2000 backbone, route a NMEA 2000 drop cable (not included) to the bottom of the T-connector added in step 3. Connect the drop cable to the T-connector and to the NMEA 2000 connector on the adapter. notiCe: If you have an existing NMEA 2000 network on your boat, it should already be connected to power. Do not connect an additional NMEA 2000 power cable to an existing NMEA 2000 network, because only one power source should be connected to a NMEA 2000 network. note: This section provides specific configuration information for the GBT 10 adapter using your compatible Garmin display device. To access the NMEA 2000 configuration menu on your display device, consult the documentation provided with your display device. Configuring the GBT 10 Adapter Calibrating the Trim Tab Position To use the GBT 10 adapter, you must calibrate the position of the trim tabs the adapter is associated with. note: If you only adjust your trim tabs within a limited range of motion on a regular basis, calibrate the GBT 10 adapter using your normal range instead of the full range. Only the calibrated range will be displayed on your chartplotter or marine instrument. 1. Select an option: · For most Garmin chartplotters, select Review > Trim Tab Calibration. · For other Garmin marine devices, select Config > Trim Tab Calibration. Follow the on-screen instructions to calibrate the trim tab position. Configuring the GBT 10 Adapter if the Trim Tab Calibration Selection Is Not Displayed Depending on the version of software loaded on your Garmin marine instrument, the specific configuration options may not be displayed on the configuration screens. To calibrate the trim tab position if the menu option is not displayed: To use the GBT 10 adapter, you must calibrate the position of the trim tabs that the adapter is associated with. You can enter a minimum of two, and a maximum of sixteen, trim tab positions. When the trim tabs are in the highest position, they should be at or near 0% of their full range of motion. [. . . ] Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www. garmin. com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN GBT 10 BENNETT TRIM TAB ADAPTER




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN GBT 10 BENNETT TRIM TAB ADAPTER will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.