User manual GEMINI PS-121X

[. . . ] If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. [. . . ] Microphones may be plugged into the rear panel-mounted MICROPHONE (3) ¼" jack. CROSS FADER SECTION: The CROSS FADER (16) allows you to mix from one source to another. The CROSS FADER (16) in your unit is removable and if the need arises can be easily replaced. Also available are our RG-45 (RAIL GLIDETM) DUALRAIL CROSS FADER and RG-45Pro (Rail Glide PRO) The Rg45 features, a stiffer feel and smoother curve specially made for mixing, while the RG-45Pro is specially designed for scratching, with a smoother feel and a special scratch-oriented curve. Just purchase one from your Gemini dealer and follow the instructions: Use the face panel located rotary CUE VOLUME CONTROL (13) to adjust the CUE volume without changing the overall mix. By turning the face panel located CUE 1/2 ROTARY CONTROL (14) counter clockwise you will be able to choose the channel you wish to monitor. MIC SECTION: Plug your main MIC into the MIC 1/4" input (3) located on the rear panel. OUTPUT SELECTION CONTROL: Once you are comfortable with the sound level of your music you may adjust the volume with the MASTER (11) rotary control. To connect your Ipod or other Digital Media Player, use the included Ipod cable. Connect the 1/8'' end of the cable to the headphone or line out jack of your player, and connect the RCA end to the line input (7) of your mixer. - Removible por usuario para reemplazar el cross fader - EQ 2 bandas rotativo con cut & ganancia por canal - Volumen rotativo de cue y Master FRONTAL: - Salida auriculares ¼" CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. gROUNDING OR POLARIZATION: · If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. ⷠIf this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. [. . . ] Under normal circumstances your product will spend no more than 10 working days at Gemini. Gemini warrants its products to be free from defects in materials and workmanship for One (1) year from the original purchase date. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by an authorized Gemini Service Center. There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. [. . . ]