User manual HOLMES HAOF1233

[. . . ] Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by The Holmes Group (or Bionaire) may cause hazards. 13) Keep unit away from heated surfaces and open flames. THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug having one blade wider than the other). If it still does not fit, contact qualified personnel to install the proper outlet. [. . . ] Pass the screw with the washer through the opening on the bottom of the grill ring and fasten to the metal plate. ILLUSTRATION M N O CLEANING/MAINTENANCE Follow these instructions to correctly and safely care for your Holmes table fan. Please remember: · Always unplug the fan before cleaning or disassembling. · Do not use any of the following as a cleaner: gasoline, thinner, benzine (See instructions for fan head assembly) Step 1: To access the fan blade, remove the front grill and the fan blade nut. Step 2: Clean the fan blade, both front and rear grills with a soft cloth moistened with a mild soap solution. Step 3: Replace blade, tighten the fan blade nut, and securely fasten the front grill. Fan Head and Base Cleaning Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base and head. Do not allow the motor or other electrical components to be exposed to water. A B C E D KL F G H I J Q P A. S. Motor Housing Pole Speed Control Lever Base Base Nut OPERATING INSTRUCTIONS Step 1: Set the fan base on a dry, level surface. Step 2: Please make sure the On/Speed lever is in the "Off" position. Step 3: The SPEED is adjusted by moving the lever up or down to the desired setting. Step 4: The OSCILLATION control knob is located on the top of the fan motor housing. To stop oscillation, pull control knob up. FAN STORAGE Your fan can be stored in the off-season either partially disassembled or assembled. · If stored disassembled, we recommend using the original (or appropriately sized) box. · If stored assembled or partially assembled, remember to protect the fan head from dust. ADJUSTMENT INSTRUCTIONS Tilt Adjustment To change the tilting angle of the fan head, move the fan head to the desired angle. SERVICE INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. If you have any questions regarding this unit's operation or believe any repair is necessary, please write to our consumer service department. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. If you have any other questions or comments, please write: The Holmes Group, Inc. Box 769, Milford, MA 01757-0769 or visit our website at www. holmesproducts. com For your own records, staple or attach your sales receipt to this manual. [. . . ] IMPORTANT Return INSTRUCTIONS Your warranty depends on your following these instructions if you are returning the unit more than 30 days after the date of purchase: 1. Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) your name, full address with zip code and telephone number, b) a dated sales receipt or PROOF OF PURCHASE, c) your $5. 00 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. [. . . ]