User manual HP 2311GT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP 2311GT. We hope that this HP 2311GT user guide will be useful to you.


HP 2311GT : Download the complete user guide (1795 Ko)

Manual abstract: user guide HP 2311GT

Detailed instructions for use are in the User's Guide.

[. . . ] Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. [. . . ] Provides the recommended resolution mode and refresh rate for the monitor. Com/support Returns all OSD menu settings and DDC/CI controls to the factory default settings, except the Language. Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The choices are: • • Auto-Switch Source DVI VGA FW Version Backlight Hours Service Support Factory Reset Source Control (on select models) Turns the system's automatic video signal input to On or Off. Exit ENWW Using the On-Screen Display (OSD) 15 Selecting Video Input Connectors The input connectors are: • • VGA connector (analog) DVI-D connector (digital) (Select Models) The monitor automatically determines which inputs have valid video signals, and displays the image. The source of input can be switched using the Input Select option in the OSD menu. Identifying Monitor Conditions Special messages will appear on the monitor screen when identifying the following monitor conditions: • Monitor Status - When the monitor is powered on or when the input source signal is changed, a Monitor Status message is displayed for five seconds. The message shows which input is the current active signal, the status of the auto-switch source setting (On or Off), the default source signal, the current preset display resolution, and the recommended preset display resolution. Indicates the monitor does not support the input signal because the resolution and/or refresh rate are set higher than the monitor supports. No Source Signal - Indicates the monitor is not receiving a video signal from the PC on the monitor video input connector. Check to determine if the PC or input signal source is off or in the power saving mode. auto Adjustment in Progress - Indicates the auto-adjustment function is active. Monitor Going to Sleep - Indicates the screen display is entering a sleep mode. Check Video Cable - Indicates the video cable is not properly connected to the computer. OSD Lockout - The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lockout displays for ten seconds. €¢ • • If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD. If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD. • • • • • • Power Button Lockout - Indicates the power button is locked. If the power button is locked, the warning message Power Button Lockout displays. €¢ • If the power button is locked, press and hold the power button for 10 seconds to unlock the power button function. If the power button is unlocked, press and hold the power button for 10 seconds to lock out the power button function. [. . . ] This feature allows the monitor to operate on input voltages between 100−120V~ or 200− 240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country where you purchased the equipment. If you need to obtain a power cord for a different country, you should purchase a power cord that is approved for use in that country. The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP 2311GT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP 2311GT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.