User manual HP PHOTOSMART M447 QUICK START GUIDE

[. . . ] The electronic User Guide is also copied to your computer when you install the HP Photosmart Software. To view the User Guide after it has been installed on your computer: · For tips and tools to help you use your camera more effectively, visit www. For product support, including firmware, software, and driver updates, visit www. Zoom lever (Digital and Optical)--Accesses / Zoom while in Picture Capture or Video Record; accesses Thumbnails and Magnify while in Playback and images. [. . . ] To use internal memory and view images stored there, turn off the camera then remove the memory card. The HP Photosmart Software provides features for transferring images and video clips to your computer, as well as features for modifying stored images (remove red eyes, rotate, crop, resize, and more). To install the HP Photosmart Software, your computer must meet the system requirements as stated on the camera packaging. If you have trouble installing or using the HP Photosmart Software, see the Hewlett-Packard Technical Support website for more information: www. Close all programs and temporarily disable any virus protection software. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen instructions. If the installation window does not appear, click Start, click Run, type D:\Setup. When the software has finished installing, re-enable virus protection software. Once installation is complete and you have restarted your computer, System Preferences automatically opens to the HP Photosmart Camera settings. You may change settings so the HP Photosmart Software starts automatically when you connect your camera to your Macintosh (for more information, click the help button on the HP Photosmart Camera settings dialog). Take a picture You can take a picture when you are in Picture Capture. Press the Shutter button halfway down to measure and lock the focus and exposure. The focus brackets in the Image Display turn solid green when focus is locked. After you have taken a picture, the camera displays it briefly in the Image Display. The focus brackets in the Image Display turn solid green when focus is locked. Use To play a video clip, press once the first screen of the clip appears on the Image Display. NOTE: To hear audio associated with video clips, transfer them to your computer. Use this procedure to transfer images and video clips to your computer. NOTE: Transferring a large number of highresolution images from a memory card to your computer may take up to two hours. When transferring a large number of images, be sure your camera batteries are fully charged or use an optional HP Photosmart dock or memory card reader. Connect the camera and computer using the USB cable that came with your camera. When the Image Display indicates that the camera is connected to the computer, follow the instructions on the computer screen to transfer the images. [. . . ] You can select from the following options: · To access this menu, press from , , or , then select Camera Setup. You can select from the following options: · To access this menu, press from , , or , then select Camera Help. You can select from the following options: · Extending battery life To conserve battery power, the Image Display turns off after a period of inactivity. If you are turning on the camera only to view images, to , then turn on the camera to start slide in Playback without extending the lens. [. . . ]