User manual HP SURESTORE 165ST OPTICAL JUKEBOX 128/238 SLOT, 5.2 GBYTE DRIVE OPTICAL JUKEBOX UPGRADE AND CONVERSION INSTRUCTION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP SURESTORE 165ST OPTICAL JUKEBOX. We hope that this HP SURESTORE 165ST OPTICAL JUKEBOX user guide will be useful to you.


HP SURESTORE 165ST OPTICAL JUKEBOX 128/238 SLOT, 5.2 GBYTE DRIVE OPTICAL JUKEBOX UPGRADE AND CONVERSION INSTRUCTION: Download the complete user guide (756 Ko)

You may also download the following manuals related to this product:

   HP SURESTORE 165ST OPTICAL JUKEBOX STORAGEWORKS LIBRARY AND TAPE TOOLS FAQ - WINDOWS GUI VERSION - (724 ko)

Manual abstract: user guide HP SURESTORE 165ST OPTICAL JUKEBOX128/238 SLOT, 5.2 GBYTE DRIVE OPTICAL JUKEBOX UPGRADE AND CONVERSION INSTRUCTION

Detailed instructions for use are in the User's Guide.

[. . . ] 128/238-Slot, 5. 2 Gbyte-Drive Optical Jukebox Upgrade and Conversion Instructions Edition 1 Part No. C1104-90018 Printed in USA 3/98 Printing History New editions of these instructions incorporate all material updated since the previous edition. (Minor corrections and updates incorporated at reprint do not change this date. ) Part number C1104-90018 Edition 1 March 1998 ii Typographical Conventions The following typographical conventions are used in these instructions: Emphasis: Denotes important information. Keycap: Keys on the library. Computer Output: Information displayed in the display window and screen menu items that you can select. WARNING Warnings call attention to a procedure or practice that could result in personal injury if not correctly performed. [. . . ] THEN: · · If you are using kits C5138J/K/L C1154J/K/L go to page 3-5. If you are using kits C5139J/K/L and C1154J/K/L go to page 3-17. 3-2 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Record Configurations Record Configurations 1. Execute EMPTY DRIVES from the control panel TEST * menu, if necessary. IMPORTANT Record the jukebox configuration settings so that the settings may be restored after the conversion. CAUTION Do not switch off power to the jukebox until you are sure the SCSI bus is inactive. Switching off the jukebox when the SCSI bus is active can cause data loss and/or indeterminate bus states. 3-3 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Access the Working Areas Access the Working Areas WARNING Disconnect the power cord before taking the jukebox apart to prevent possible electrical shock. Do not switch off power to the jukebox until you are sure the SCSI bus is inactive. Switching off the jukebox when the SCSI bus is active can cause data loss and/or indeterminate bus states. Access Panels CAUTION Figure 3-1 3-4 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Converting From Jukeboxes Using 2. 6-Gbyte Drives to Jukeboxes Using 5. 2-GByte Drives Converting From Jukeboxes Using 2. 6-Gbyte Drives to Jukeboxes Using 5. 2-GByte Drives Converting a 4- or 6-Drive (2. 6 Gb), 128-Slot Jukebox to a 4- or 6-Drive (5. 2 Gb), 128-Slot Jukebox (C5138J/K/L and C1154J/K/L Kits) Step 1: Convert Drives in Positions #1 and #2 to 5. 2 Gbyte (C5138J/K/L/ Kit) NOTE Figure 3-2 If you will be converting a 6-drive jukebox, you will also be using kit C1154J/K/L. Drives and Drive Cover Plate Locations 3-5 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Converting From Jukeboxes Using 2. 6-Gbyte Drives to Jukeboxes Using 5. 2-GByte Drives 1. Disconnect all drive cables for the drive enclosures you are converting (Figure 3-3 uses drives at position #1 as an example). Remove the four T-10 screws holding the top and bottom access plates on the drive enclosure (see #1 and #2 in Figure 3-4). Remove the four T-10 screws that hold the drives in the drive enclosure and slide the drive forward a small amount to give you room to remove the cables. (#3 screws on Figure 3-4 hold the upper drive, #4 screws hold the lower drive. ) 3-6 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Converting From Jukeboxes Using 2. 6-Gbyte Drives to Jukeboxes Using 5. 2-GByte Drives Figure 3-4 Unmounting Drives From the Enclosure 5. Slide the drives out of the enclosure. 3-7 Converting 2. 6-Gb-Drive Jukeboxes to 5. 2-Gb-Drive Jukeboxes Converting From Jukeboxes Using 2. 6-Gbyte Drives to Jukeboxes Using 5. 2-GByte Drives Figure 3-5 Drive Cables 7. Use the drive cables from the kit and route the cables for two drives into the enclosure as shown in Figure 3-5. · · · #1 - drive power cables #2 - SCSI cable #3 - drive interface cables 8. Mount the cable clip on the rear of both drives as shown in #4 of Figure 3-5. Slide the bottom drive into the enclosure far enough to connect a set of drive cables to the drive as shown in #1, #2, and #3 on Figure 3-5. As you connect the drive interface cable, slide the cable into the cable clip on the rear of the drive. Slide the top drive into the enclosure far enough to connect a set of drive cables to the drive as shown in #1, #2, and #3 on Figure 3-5. As you connect the drive interface cable, slide the cable into the cable clip on the rear of the drive. [. . . ] Check for proper jukebox operation by running the "Wellness Test. " NOTE If a failure occurs, refer to Chapter 4, Troubleshooting" in the 660ex/1200ex Optical Jukebox Service Manual (C1104-90030). Enter any customer configurations that are different than default using the CONF * menu. 5-2 Verifying Jukebox Operation and Labeling Restore Interface Selection and Cabling Restore Interface Selection and Cabling 1. Replace the SCSI cables on the interface PCA ports in the same configuration as they were before the upgrade/conversion. Place the interface select switch to select whichever interface type it was before the upgrade/conversion (single-ended or differential). 5-3 Verifying Jukebox Operation and Labeling Restore Non-Default Configurations Restore Non-Default Configurations Table 5-1 Default Configuration Settings Configuration RECOVERY DUAL PICKER POWER SECURE SECURE MAILSLOT MAILSLOT DOOR SLOTS 230-238 POWER SECURE REPORT RECOVERED CONF 40 WRITE VERIFY LUN MODE Default Value ON ON OFF ON CLOSED ON OFF ON OFF ON OFF Jukebox Setting 5-4 Verifying Jukebox Operation and Labeling Restore Non-Default Configurations Configuration SCSI Addresses (four- and six-drive jukeboxes Default Value robotics controller =6 drive 1 = 5 drive 2 = 4 drive 3 = 3 drive 4 = 2 drive 5 = 1 (if installed) drive 6 = 0 (if installed) Jukebox Setting SCSI Addresses (ten-drive jukeboxes) robotics controller =6 BUS 1 drive 1 = 5 drive 2 = 4 drive 3 = 3 drive 4 = 2 BUS 2 drive 5 = 5 drive 6 = 4 drive 7 = 3 drive 8 = 2 drive 9 = 1 drive 10 = 0 Password 000-000-000 5-5 Verifying Jukebox Operation and Labeling Restore Non-Default Configurations Table 5-2 Description of the Configuration Choices Configuration Name RECOVERY ON/OFF Description Toggles between ON and OFF. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP SURESTORE 165ST OPTICAL JUKEBOX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP SURESTORE 165ST OPTICAL JUKEBOX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.