User manual HP SURESTORE 40FX OPTICAL JUKEBOX ADDING 1 DRIVE TO THE C1100 SERIES JUKEBOX - C1156-90000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP SURESTORE 40FX OPTICAL JUKEBOX. We hope that this HP SURESTORE 40FX OPTICAL JUKEBOX user guide will be useful to you.


HP SURESTORE 40FX OPTICAL JUKEBOX ADDING 1 DRIVE TO THE C1100 SERIES JUKEBOX - C1156-90000: Download the complete user guide (105 Ko)

You may also download the following manuals related to this product:

   HP SURESTORE 40FX OPTICAL JUKEBOX STORAGEWORKS LIBRARY AND TAPE TOOLS FAQ - WINDOWS GUI VERSION - (724 ko)
   HP SURESTORE 40FX OPTICAL JUKEBOX OPTICAL DRIVE AND LIBRARY SCSI-2 COMMAND REFERENCE (9094 ko)

Manual abstract: user guide HP SURESTORE 40FX OPTICAL JUKEBOXADDING 1 DRIVE TO THE C1100 SERIES JUKEBOX - C1156-90000

Detailed instructions for use are in the User's Guide.

[. . . ] Read This First This upgrade requires code to be downloaded to the controller PCA and the drives. BEFORE starting this upgrade, obtain the following: * The downloadable code required for this upgrade. FTP this code from hpgrsg. gr. hp. com (15. 38. 89. 10) using an "anonymous" login. [. . . ] Disconnect the SCSI interface from the host. 4 Installing the 1-Drive Upgrade Caution Wear a grounding strap when working inside the outer shell of this jukebox. Remove the jukebox cover by removing the four T-25 screws on that hold the cover to the rear panel. Pull the cover back and away from the chassis. ***** Removing screws on back panel to release top cover ***** Figure 1: Removing the outside cover 5 3. Remove the 8 T-15 screws on the top, bottom and sides of the access panel. Remove the access panel *********** Removing the Access Panel ************ Figure 2: Removing the access panel 4. Pull the picker up to the top of the chassis and insert a T-25 screw in the service hole, which holds the picker at the top of the chassis (Figure 3). ***** Fastening the picker out of the way ***** Figure 3: Fastening the picker to the service position 6 5. Remove the 3 cartridge "stop" screws (T-15). Figure 4: Cartridge "stop" screws Accessing Components in the Front Bezel 6. Remove the two T-25 screws that secure the front bezel to the chassis. These screws are located behind the bezel as shown in Figure 5. Figure 5: Front bezel mounting screws 7 7. Rotate the front bezel out and disconnect the front panel cable and the mailslot sensor cable. NOTE A tab on the top of the mailslot sensor cable must be released before the cable can be unhooked. Insert a small screwdriver and push this tab down (see inset in Figure 6). ***** Front Panel Tilted out ***** Figure 6: Front panel tilted out 8. Note The cables/connectors for the additional drive are already in place in the jukebox. You will only have to mount the drive and connect it to the cables. 8 Figure 7: Front RFI shield Figure 8: Drive DIP switch settings 9. The right-end switch on the rearmost DIP switch is set to the ON position. Slide the drive into the the jukebox chassis just above the current drive. [. . . ] Select the appropriate label -- Use the C1115 label when upgrading a C1100 (single-ended interface) jukebox. Use a C1116 label when upgrading a C1101 (differential interface) jukebox. Figure 10: Location of the product label Figure 11: Adding the upgrade label 21. Connect the external SCSI cable and terminator according to site requirements. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP SURESTORE 40FX OPTICAL JUKEBOX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP SURESTORE 40FX OPTICAL JUKEBOX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.