User manual HUAWEI P8

[. . . ] Com/en/support/hotline/ for up-to-date contact information for your country or region. 1 Your phone at a glance Before you start, let's take a look at your new phone. To forcibly restart your phone, press and hold the power button until your phone vibrates. Micro-USB connector Earpiece Card tray Power button Volume button 2 Getting started Follow the instructions in the following figures to set up your phone. [. . . ] Charger safety •For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible. 7 •Unplug the charger from the electric socket and from the device when not in use. 5 in IEC60950-1/EN609501/UL60950-1 and has been tested and approved according to national or local standards. €If the power cable is damaged or the plug is loose, stop using it immediately. €Connect the device only to products that display the USB-IF logo or that comply with the USB-IF program. Battery safety •Do not touch the power cable with wet hands or pull it to disconnect the charger. €Do not bridge the battery terminals with conductive material, such as keys or jewellery. Doing so may lead to an electric shock, short circuit, or malfunction. €If your charger has been exposed to liquid or excessive moisture, take it to an authorised service centre for inspection. €Do not attempt to modify the battery, insert foreign objects into it, or immerse or expose it to liquids. 8 •If the battery leaks, ensure that the electrolyte does not make contact with your skin or eyes. Ensure that the device accessories, such as a device case and device holster, are not composed of metal components. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the International Commission on Non-Ionizing Radiation Protection (ICNIRP), an independent scientific organisation, and include safety measures designed to ensure the safety of all users, regardless of age and health. The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR Reduction of hazardous substances This device is compliant with the REACH Regulation [Regulation (EC) No 1907/ 2006] and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if included) are compliant with the Battery Directive (Directive 2006/66/EC). For up-to-date information about REACH and RoHS compliance, visit the website http://consumer. 11 value is determined at the highest certified power level in laboratory conditions, but the actual SAR level during operation can be well below the value. This is because the device is designed to use the minimum power required to reach the network. 0 W/kg averaged over 10 grams of tissue, and the highest SAR value for this device complies with this limit. The highest SAR value reported for this device type when tested at the ear is 1. [. . . ] The product described in this document may include software that is the copyright of Huawei or its licensors. Such software shall not be reproduced, distributed, modified, decompiled, disassembled, decrypted, extracted, , , and are trademarks or registered trademarks of Huawei Technologies Co. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks, products, services and company names mentioned herein may be the property of their respective owners. [. . . ]