User manual HUSQVARNA 39R

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 39R. We hope that this HUSQVARNA 39R user guide will be useful to you.


HUSQVARNA 39R : Download the complete user guide (932 Ko)

Manual abstract: user guide HUSQVARNA 39R

Detailed instructions for use are in the User's Guide.

[. . . ] 132R/142R Operator's Manual Read through the Operator‘s Manual carefully and understand the content before using the machine. Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. €¢ Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord. [. . . ] English – 13 SAFETY INSTRUCTIONS Grass clearing using the trimmer head and plastic knives • Hold the trimmer head just above the ground at an angle. €¢ The cord can easily remove grass and weeds up against walls, fences, trees and borders, however, it can also damage sensitive bark on trees and bushes and damage fence posts. €¢ Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the engine speed. clearing • The clearing technique removes all unwanted vegetation. Let the end of the cord strike the ground around trees, posts, statues and the like. €¢ The cord wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc. €¢ When trimming and clearing you should use less than full throttle so that the cord lasts longer and to reduce the wear on the trimmer head. Trimming • The trimmer is ideal to cut grass that is difficult to reach using a normal lawn mower. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool. €¢ Do not allow the trimmer head to constantly come into contact with the ground during normal cutting procedures. Sweeping • The rotating cord‘s fanning effect can be used for quick and easy cleaning. Hold the cord parallel to and above the area to be swept and move the trimmer from side to side. €¢ When cutting and sweeping you should use full throttle to obtain the best results. Can be thrown up into the eyes resulting in blindness or other serious injury. Children, animals, onlookers and helpers should be outside the safety zone of 15 meters (50 feet). 1 3 2 7 5 22 17 4 16 12 10 15 11 8 6 9 14 27 19 25 29 30 20 1 18 31 32 13 26 21 4 What is what on the brushcutter 132R?Blade Grease filler cap Angle gear Blade guard Tube Locking button for start throttle Throttle trigger Stop switch Throttle trigger lock Suspension Cylinder cover Starter handle Fuel tank Choke Air filter cover Handle bars 17. Clutch cover Locking nut Support flange Support cup Drive disc Handle bar adjustment Socket spanner Operator‘s Manual Transport guard Spanner Locking pin Harness Air purge English – 15 WHAT IS WHAT?1 3 2 7 5 18 10 8 6 9 15 17 11 33 4 34 16 12 14 19 27 20 21 25 29 28 22 30 4 33 26 1 31 32 13 What is what on the brushcutter 142R?16 – English Blade Grease filler cap Angle gear Blade guard Tube Locking button for start throttle Throttle trigger Stop switch Throttle trigger lock Suspension Cylinder cover Starter handle Fuel tank Choke Air filter cover Handle bars Clutch cover 18. Locking nut Support flange Support cup Drive disc Handle bar adjustment Socket spanner Operator‘s Manual Transport guard Allen key Spanner Locking pin Harness Air purge Cord cutter Guard extension ASSEMBLY Main body assembling Connect the engine (A) to the tube (B) with four screws (C). Assembly of the blade and trimmer head C It is extremely important that the disc drive’s/support flange’s guide engages correctly in the cutting equipment’s centre hole when assembling the cutting equipment. [. . . ] Air filter The air filter should be cleaned regularly removing dust and dirt to avoid: • carburettor malfunction • starting problems • reduced engine power • unnecessary wear to engine parts • abnormal fuel consumption Clean the filter after every 25 hours or more regularly if operating conditions are exceptionally dusty. 0, 6-0, 7 mm 142R If the machine is low on power, difficult to start or runs poorly while idling always check the spark plug first. If the spark plug is dirty, clean it and at the same time check that the electrode gap is 0, 6–0, 7 mm. The spark plug should be changed after about one month of operation or earlier if necessary. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 39R




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 39R will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.