User manual IOMEGA EXIMAC
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual IOMEGA EXIMAC. We hope that this IOMEGA EXIMAC user guide will be useful to you.
Manual abstract: user guide IOMEGA EXIMAC
Detailed instructions for use are in the User's Guide.
[. . . ] http://www. iomega. com America OnlineTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyword: Iomega Microsoft Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-801-778-5763 Automated E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Although the equipment has been tested and found to comply with allowed RF emission limits, as specified in the above cited Rules, there is no guarantee that interference will not occur in a particular situation. Interference can be determined by turning the equipment off and on while monitoring radio or television reception. The user may be able to eliminate any interference by implementing one or more of the following measures: · Reorient the affected device and/or its receiving antenna. · Increase the distance between the affected device and the computer equipment. · Plug the computer and its peripherals into a different branch circuit from that used by the affected device.
Installation Guide
drive
®
2
Jaz "tools" Disk (contains Jaz Tools software)
Jaz Drive
50HD to 25D Cable Converter
External Power Supply
Manuals and Install Diskettes*
Data Cable
* You will not need an install diskette to install Jaz Tools on your Macintosh.
1
WARNING Always turn off power to the computer and all devices connected to it (such as printers or drives) before beginning any computer hardware change.
Shut down your Mac, turn off all connected devices, and pick up the Jaz data cable.
Unpack the Jaz drive and accessories.
This guide shows how to install the portable SCSI Jaz drive on a Macintosh. If you encounter any problems while installing your Jaz drive, refer to the "Troubleshooting" section in the Jaz User's Guide.
GB
4
3
Jaz Connector
To Remove the Jaz Data Cable: Squeeze the spring locks on both sides of the data cable connector while pulling on the connector.
Use the 50HD to 25D cable converter to connect the other end of the data cable to the built-in SCSI connection on your Macintosh.
Connect one end of the data cable to either SCSI port on the back of your drive, and PUSH until connector locks into place. (If the connector
PowerBook Users You need a special PowerBook cable to connect the Jaz drive. Check with your Iomega dealer or call Iomega at 1-800-MY-STUFF to order a Jaz PowerBook cable.
does not go on easily, try turning it over. )
CAUTION DO NOT attempt to stand the Jaz drive on its side!NEVER move the drive when in use!
SC
4
SI
ID
rm Te I A
O
PW
R
0
I
SC
4
SI
ID
rm Te I A
O
PW
R
0
I
(Open up for Step 5)
1
5
OPTIONAL: You can connect other SCSI drives to the Jaz drive using another SCSI cable (usually a high density 50 pin to 50 pin cable).
If you are connecting the Jaz drive to an existing SCSI chain, you may need a different cable or converter. Call your Iomega dealer or 1-800-MY-STUFF to order.
9
Gently insert the 1GB "tools" disk into the Jaz drive.
The amber data light on the Jaz drive flashes as the disk spins up and glows steadily while it acquires. When the amber data light goes out, the drive is ready to use.
CAUTION Never put anything except Jaz disks into the Jaz drive as this could damage your drive. Always keep your Jaz disks free of dust and debris.
To Another SCSI Device
I PW R 0 rm Te I A
O
Disk shown fully inserted
4
1
1
SC
G B
SI
ID
to
ols
B G
To Computer or Previous SCSI Device
Disk Eject Button
Disk shown ejected from drive
6
Check SCSI IDs if you have a SCSI chain.
Each device in the SCSI chain must have a unique SCSI ID. If you have no other devices, the factory setting of SCSI ID 4 should work. If you need additional information, refer to "SCSI Guidelines" in the Jaz User's Guide.
SCSI Termination Your Jaz drive is set to handle SCSI termination automatically. Refer to the Jaz User's Guide if you need additional information.
Ejecting Jaz Disks The disk eject button is disabled when the Jaz disk icon appears on the Macintosh Desktop. To eject a Jaz disk from the Desktop, use Put Away from the File menu or drag the disk icon to the Trash icon. [. . . ] Make sure you hold down the Shift key until you see the message indicating that extensions are off or disabled. If the Iomega Tools disk icon still does not appear, recheck the instructions in this Installation Guide. Make sure the Jaz drive is correctly and securely connected to the Mac. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE IOMEGA EXIMAC
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual IOMEGA EXIMAC will begin.