User manual IOMEGA STORCENTER PRO NAS 150D 1TB

[. . . ] Plug the the StorCenter Pro into an uninterruptible power supply (UPS). [. . . ] If the status indicator is not on, check the power connections and the positions of the AC selector switch and power supply switch on the back of the StorCenter Pro, then press and release the power button on the front panel. â· Make sure you are using a functional Ethernet cable and that the StorCenter Pro is connected to a 10/100/1000Base-T switch, hub, or router or directly to your computer. NOTE: The StorCenter Pro will not be detected if it is powering up when the software runs. Wait until the indicator light is solid green and run Discovery Tool Pro Software again. If the StorCenter Pro is still not detected, check the support information on www. Never plug your StorCenter Pro directly into a wall socket or power strip. unexpected loss of power may corrupt data or damage the Iomega StorCenter Pro operating system. Make sure the voltage on the AC selector switch on the back of the StorCenter Pro Server matches the power requirements for your country. [. . . ] Certain other product names, brand names, and company names may be trademarks or designations of their respective owners. [. . . ]