User manual JENSEN VOYAGER MSR2107

[. . . ] When Boating Keep the volume level Iow enough to be aware of your surroundings. Protect from Water Do not submerge or expose the product directly to water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system. [. . . ] Press AS/PS again to stop scanning when the desired station is reached. During radio operation, received signals are usually in stereo mode as indicated by the "ST" icon. However, when the signals are weak or intermittent, you can activate the Local (LOC) mode by pressing the LO/DX button (20). This mode favors access to local stations whose signals are much stronger; thereby improving radio reception. Press the BAND button (16) to change between three FM bands and two AM (MW) bands. Press and hold the TUNE/TRK >>| or |<< buttons (18, 19) to automatically seek the next or previous strong station. The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your favorite channels. Press and hold a preset button (5-10) until the corresponding preset button number appears. Press the TUNE/TRK |<< / >>| buttons (18/19) to move between the three digits. The Sirius ID number will scroll twice and then freeze with the first 11 digits on the display. While in the category mode, press the CAT - /+ buttons again to view category names. (The lowest channel number within the chosen category will always be the default first channel tuned. This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel control buttons. The following iPod versions are supported: · 2 only) iPod Mini iPod 4G iPod Photo iPod Nano (1st, 2nd and 3rd generation) iPod 5G (Video) Selecting Tracks During playback, press the TUNE/TRK |<< / >>| button (18/19) to play the previous or next track in the current category. Press the TUNE/TRK |<< button (18) once to play the song from the start position or press TUNE/TRK |<< twice to play the previous track. press and hold the TUNE/TRK |<< / >>| button (18/19) to fast reverse/forward the song. NOTE: If you press and hold the TUNE/TRK |<< / >>| button to change the current song to the previous/next song, you will exit fast reverse/forward mode. The unit will automatically switch to iPod mode when an iPod is plugged into the iPod cable. To return to the iPod menu from any other source, press the MODE button (4) on the control panel or remote control until "iPod" appears on the display. The iPod power turns on automatically when an iPod iPod iPod iPod iPod iPod is connected to 30-pin iPod cable, as long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it from the cable or by iPod CABLE turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep mode after 2 minutes. [. . . ] During MP3/WMA music file playback, press the COPY button (20) twice to enter COPY FOLDER mode. NOTE: In order to prevent unintentional erasing of external USB device, always confirm that you are in FLASH mode before performing ERASE function. NOTE: Press the COPY button a 3rd time to return to current playing status. USB Device Memory During USB mode playing status, press the MENU button (3) and select "ROM" option, press VOLUME +/- button to select between "FREE USB" and "FREE Flash", and then press the MODE/SEL button (4) to see the amount of free USB memory. [. . . ]