User manual JVC KD-R482
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JVC KD-R482. We hope that this JVC KD-R482 user guide will be useful to you.
Manual abstract: user guide JVC KD-R482
Detailed instructions for use are in the User's Guide.
[. . . ] Indd 1
Data Size: Book Size:
B6L (182 mm x 128 mm) B6L (182 mm x 128 mm)
7/29/2016 5:10:37 PM
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] AUX
Use a portable audio player 1 Connect a portable audio player (commercially available). 5 mm stereo mini plug with “L” shaped connector (commercially available)
MONO SET NEWS SET*2 REGIONAL*2 AF SET*2
Auxiliary input jack
Portable audio player
2 Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. FLAT/DRVN 3/DRVN 2/DRVN 1/HARD ROCK/HIP HOP/JAZZ/POP/R&B/TALK/ USER/VOCAL BOOST/BASS BOOST/CLASSICAL/DANCE Adjust your own sound settings. Preset equalizer: FLAT (default), DRVN 3, DRVN 2, DRVN 1, HARD ROCK, HIP HOP, JAZZ, POP, R&B, TALK, USER, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE
Store your own sound settings 1 Press and hold to enter EASY EQ setting. 2 Turn the volume knob to select an item (see the following table),
then press the knob. ( 10)
3 Repeat step 2 until the desired item is selected/activated or 4 Press
follow the instructions stated on the selected item. W LEVEL*4 LEVEL 01/LEVEL 02: Boosts low or high frequencies to produce a wellbalanced sound at low volume. W +03): Adjusts the output level of the subwoofer connected via speaker lead. W 00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. EXPANDER ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in (Digital Track audio data compression. Expander) SPK/PRE OUT Depending on the speaker connection method, select the appropriate setting to get the desired output. ( Speaker output settings)
Speaker output settings
Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method. SUBWOOFER LPF*4 FRQ THROUGH: All signals are sent to the subwoofer ; FRQ 55HZ/FRQ 85HZ/FRQ 120HZ: Audio signals with frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. W PHASE*4 REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [FRQ THROUGH] is selected for [SUBWOOFER LPF]. LEVEL –15 to LEVEL +06 (LEVEL 00): Preset the initial volume level of each source (compared to the FM volume level). Remove burrs from the center hole and disc edge before inserting a disc. Flac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. Discs with coloring on the recording surface or discs that are dirty. About USB devices • You cannot connect a USB device via a USB hub. Connecting a cable whose total length is longer than 5 m may result in abnormal playback. This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A. [. . . ] If the maximum power of the speakers is lower than 50 W, change the [AMP GAIN] setting to avoid damaging the speakers. If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JVC KD-R482
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JVC KD-R482 will begin.