User manual KENWOOD CAW-OP7060

[. . . ] If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. IMPORTANT : The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a threepin plug. Preparations Safety precautions Caution : Read this page carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. [. . . ] In such a case, change the installation position to avoid malfunction. 15 CAW-OP7060/DVF-R5060 (EN/K, P, E, T, X, Y) Preparations 16 Playback of disc Basic play Preparation MAIN UNIT DISC SKIP key Using the On-screen banner display CAW-OP7060/DVF-R5060 (EN/K, P, E, T, X, Y) TOP MENU key 6 (Play/Pause) key DISC SKIP key POWER ON/ OFF switch POWER ON OFF Disc tray 7 (Stop) key 6 (Play/Pause) key 7 (Stop) key 0 (open/close) key ÷ Set the POWER ON/OFF switch to the ON ( ) position. ÷ After the power is switched ON, there is a delay of about 3 seconds before the display is lit. 1 Load a disc. 1 Open the tray. MAIN UNIT Label side 2 Place a disc. 3 To set a disc to a different disc tray, press the DISC SKIP key to change the position of the disc tray. MAIN UNIT REMOTE DISC SKIP Operations 2 Start playback. MAIN UNIT REMOTE TITLE No. (CD/VCD) ÷ When the 6 key is pressed while a tray is open, the tray closes automatically, and then playback begins. ÷ Each press pauses and plays the disc alternately. When a Disc Menu appears on the screen Note In case of interactive DVDs, a Disc Menu appears on the screen. Then press ENTER to select specific menu you want to play by using Cursor keys. When a menu screen is recorded on the disc, the menu screen will be TOP MENU displayed when the TOP MENU key or MENU key is pressed. At the menu screen, the menu can be selected by pressing the Cursor keys. To stop playback MAIN UNIT REMOTE RESUME playback When the 7 (Stop) key has been pressed once during playback to stop the playback, and then playback is started again, play will start from the point where the playback had been stopped. When the 7 (Stop) key is pressed again during stop, the RESUME function is cancelled. RESUME is cancelled when 5 minutes have passed in RESUME status. 7 7 Using the On-screen banner display Playback of disc CAW-OP7060/DVF-R5060 (EN/K, P, E, T, X, Y) 17 Disc playback features STEP keys Notes SLOW keys ÷ You won't hear the sound (audio) on the DVD when you're using the Skip, Search, Step or Slow motion features. ÷ Playback features are not available during the opening credits of a movie. CD DVD VCD 1, ¡ (Search) keys 4, ¢ (Skip) keys 6 (Play/Pause) key 4, ¢ (Skip) keys 6 (Play/Pause) key Skipping chapters or tracks REMOTE MAIN UNIT 4 ¢ 4 4 : To skip backward ¢ : To skip forward ¢ ÷ The chapter (or track) in the direction of the key pressed is skipped, and the selected chapter (or track) will be played from the beginning. ÷ When the 4 key is pressed once during playback, the chapter (or track) being played will be played from the beginning. CD DVD VCD Searching REMOTE ÷ During playback, press the 1 or ¡ key. (At the time of DVD playback) 1 X 2 (F. SEARCH 1)/(R. SEARCH 1) 2 X 4 (F. SEARCH 2)/(R. SEARCH 2) 3 X 8 (F. SEARCH 3)/(R. SEARCH 3) 4 X 16 (F. SEARCH 4)/(R. SEARCH 4) (At the time of CD/VCD playback) 1 X 2 (F. SEARCH 1)/(R. SEARCH 1)* 2 X 4 (F. SEARCH 2)/(R. SEARCH 2) 3 X 8 (F. SEARCH 3)/(R. SEARCH 3) * No audio is output during the fast forward or fast reverse operation at the 2x speed (1) of DTS-CD. For example, there might be four movies on one disc (each movie might be considered a title). Because DVD VIDEO discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip a specific chapter by using the Chapter section in the Banner Display. 1 During playback, press the ON SCREEN key on the remote. 1 During playback, press the ON SCREEN key on the remote. ON SCREEN ON SCREEN 2 Press the Cursor left/right (2/3) keys until the TITLE icon is highlighted. 2 Press the Cursor left/right (2/3) keys until the CHAPTER or TRACK icon is highlighted. MULTI CONTROL MULTI CONTROL 3 Press the ENTER key. Operations ("T__" appears) 3 Press the ENTER key. ("C__" or "Tr__" appears) ENTER ENTER 4 Use the numeric keys to enter the title number. 4 Use the numeric keys to enter the chapter or track number. When you enter a one-digit Title number, you may have to press the ENTER key on the remote after pressing the numeric key (1~9) on the remote. This varies depending on number of Title within the disc you're playing. When you enter a one-digit chapter or track number, you may have to press the ENTER key on the remote after pressing the numeric key (1~9) on the remote. This varies depending on number of chapter or track within the disc you're playing. Note Notes Some discs only have one title. ÷ The Chapter feature won't work if the disc isn't formatted with separate chapters. Using the On-screen banner display CAW-OP7060/DVF-R5060 (EN/K, P, E, T, X, Y) 21 DVD Select Audio Language DVD Select Subtitle Language If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player's Audio setting. You can change the Subtitle language while you're watching a disc (but only if the disc was created with subtitles). Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote. ON SCREEN Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 2 Press the Cursor left/right (2/3) keys until the AUDIO icon is highlighted. MULTI CONTROL 2 Press the Cursor left/right (2/3) keys until the SUBTITLE icon is highlighted. MULTI CONTROL 3 Press the ENTER key. ENTER 3 Press the ENTER key. ENTER Operations The audio menu appears The subtitle menu appears Displayed when SUBTITLE is ON 4 Select the audio language with press the ENTER key. ÷ The menu is switched off when no operation is performed for about 5 seconds. 4 Select the subtitle language with press the EN5 Press the SUBTITLE ON/OFF key to subtitle ON or OFF. ÷ The menu is switched off when no operation is performed for about 5 seconds. TER key. Using the AUDIO key on the remote 1 During playback, press the AUDIO key on the remote. AUDIO Using the SUBTITLE key on the remote 1 During playback, press the SUBTITLE key on the remote. SUBTITLE 2 Select the subtitle language with press the ENTER key or SUBTITLE key. 2 Select the audio language with press the ENTER key or AUDIO key. ÷ The menu is switched off when no operation is performed for about 5 seconds. The language feature only works if the disc was created with multiple audio tracks. When you chose an audio language from the Banner Display, you only override the audio language setting in the DVD Player's main menu (in the Language Preferences menu within Setup menu) temporarily. 3 When the SUBTITLE ON/OFF key is pressed, subtitles will be displayed. Switching between display of subtitles and no display of subtitles is done each time the key is pressed. ON/OFF Displayed when SUBTITLE is ON Notes Notes 1. The subtitle feature only works if the disc was created with multiple subtitle tracks. The subtitle menu of the disc appears in some discs. 22 DVD Using the On-screen banner display CAW-OP7060/DVF-R5060 (EN/K, P, E, T, X, Y) Select Camera angle CD VCD Using IntroScan function Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won't work. IntroScan plays the first few seconds of each track on the CD similar to the scan feature that's on many car radios. Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote. ON SCREEN Using the on-screen banner display 1 During playback, press the ON SCREEN key on the remote. ON SCREEN 2 Press the Cursor left/right (2/3) keys until the ANGLE icon is highlighted. 2 Press the Cursor left/right (2/3) keys until the IntroScan icon is highlighted. MULTI CONTROL MULTI CONTROL 3 Press the ENTER key. Operations 3 Press the ENTER key. ENTER The ANGLE menu appears ENTER 4 Select the angle with press the ENTER key. ÷ The menu is switched off when no operation is performed for about 5 seconds. ÷ The first 10 seconds of each track play. [. . . ] On or "SEQ. 1". * Remote control unit Symptom Remote control operation is not possible. Cause ÷ Batteries are exhausted. ÷ The remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between. Remedy ÷ Replace with new batteries. ÷ Operate the unit inside the remote controllable range. Inhibition icon Symptom The inhibition icon is displayed and remote control is not possible. Cause ÷ Playback is restricted intentionally by the software producer. Remedy ÷ The operation is inhibited. Please try another operation. Knowledge Apparatus Claims of U. S. [. . . ]