User manual KENWOOD KCA-RC547

[. . . ] · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. · Characters that conform to ISO 8859-5 or ISO 88591 can be displayed. Refer to 38 Russian language setting of <Function setting> (page 16). · The RDS feature won't work where the service is not supported by any broadcasting station. [. . . ] 55 Special Device Regist: "SPCL DVC Select" Allow registration of a special device that cannot be registered normally. 56 Device Delete: "Device Delete" Cancel registration of the Bluetooth device. 57 PIN Code Edit: "PIN Code Edit" Specify the PIN code required when registering this unit using the Bluetooth device. Refer to <Registering PIN Code> (page 29). 46 Firmware Upgrade: "F/W Update #. ##" "USB", "CD" Upgrades the firmware. Selecting "YES" and then pressing [ENTER] button starts upgrading the firmware. http://www. kenwood. com/cs/ce/ Demo Mode Settings 47 Demo Mode: "DEMO Mode" "ON", "OFF" Specifies whether to enable demonstration. English | 19 Function setting 58 Setting the Time Interval for Automatic Answer: "Auto Answer" "OFF", "0SEC" ­ "8SEC" ­ "99SEC" This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. "1s" ­ "99s" : Automatically answers the phone call after lapse of 1 ­ 99 seconds. 59 Speaker Select: "Bluetooth HF/Audio" "Front", "All" You can specify output speakers for hands-free voice communication and Bluetooth audio sound. 60 Setting the Beep of the Incoming Call: "Call Beep" "ON", "OFF" You can output a beep from the speaker when a call comes in. 61 BT F/W Update: "BT F/W Update" Displays the firmware version and update the firmware. 62 MIC Gain: "MIC Gain" "-3" ­ "0" ­ "+3" Adjusts the sensitivity of the built-in microphone for a telephone call. "Settings" "DISP & ILLUMI" "Color SEL" To select the item, turn the Control knob. To determine the item, press the [ENTER] button. 1 Enter Display control mode KDC-5047U KCA-RC547 Press the [DISP] button. KDC-BT50U 1) Press the [FNC] button. 2) Turn the Control knob to select "Display Control", and then press the [ENTER] button. 3 Select the part where you want to set the Illumination Color Part All Button Control knob USB/ Auxiliary Terminal Display "All" "Key" "Rotary" "USB & AUX" 2 Select the Display type Turn the Control knob to select Display type A or B, and then press the [ENTER] button. 3 Select Text display selection mode Turn the Control knob to select "DISP Text Select", and then press the [ENTER] button. Turn the Control knob to select part, and then press the [ENTER] button. 4 Select the text display part (Display type A only) Push the Control knob towards up or down. The selected text display part blinks. 4 Select the Illumination Color Turn the Control knob to select color, and then press the [ENTER] button. Select the color from "Variable Scan"/ "Color1" -- "Color 24". 5 Select the text Turn the Control knob. 5 Exit Function setting mode Press the [ ] button for at least 1 second. 6 Exit Function setting mode Press the [ ] button for at least 1 second. / · If the selected display item does not have any information, alternative information is displayed. · Some items cannot be selected depending on the display type and row. · When selecting "Folder name" while playing with iPod, names will be displayed depending on currently selected browsing items. · If the iPod Control by Hand Mode is set to on while playing the iPod, "iPod By Hand Mode" is displayed. · If all characters cannot be displayed while playing with iPod, the file number in the list is displayed. Information Music title Folder name File name Display "TITLE***" "FLD***" "FILE***" English | 23 Function of KDC-BT50U/ KCA-BT200 (Optional Accessory) Operation of hands-free phoning Before Use · For details on the Bluetooth cell-phone with the hands-free function, see <About the Cell-Phone> (page 35). · You need to register your cell-phone before using it with this unit. · If you have registered two or more cell-phones, you need to select one of them. [. . . ] The cell-phone has not been registered (pairing). No Voice: No Entry: HF Disconnect: The unit cannot communicate with the cellphone. If this message still appears, press the reset button on the control unit. If this message still appears, press the reset button on the control unit. Pairing error. HF Error 68: Unknown: Device Full: PIN Code NG: Connect NG: Pairing Failed: Err No Matching: The voice tag is wrong. [. . . ]