User manual KENWOOD KDC-U353
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KDC-U353. We hope that this KENWOOD KDC-U353 user guide will be useful to you.
Manual abstract: user guide KENWOOD KDC-U353
Detailed instructions for use are in the User's Guide.
[. . . ] Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.
2CAUTION
To prevent damage to the machine, take the following precautions:
· Make sure to ground the unit to a negative 12V DC power supply. [. . . ] When the Magazine Random mode is ON, "MGZN RDM" is displayed.
Scan Play
Playing the first part of each song on the disc or Audio file folder you are listening to and searching for the song you want to hear.
/
· When you push the Control knob toward [¢], the next random song starts.
1 Start Scan Play
Press the [SCAN] button. "TRAC SCN"/"FILE SCN" is displayed.
2 Release it when the song you want to listen to
is played Press the [SCAN] button.
18 |
English
Function of Audio file
Text/Title Scroll
Scrolling the displayed CD text or Audio file text. Push the Control knob toward [FM] for at least 2 seconds.
Folder Select
Quickly selecting the folder you want to hear.
1 Enter Folder Select mode
Press the [F. SEL] button. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name.
2 Select the folder level
Push the Control knob towards [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob, 1 level up. Selecting a folder in the same level Push the Control knob towards [4] or [¢]. With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob, to the next folder. Returning to the top level Press the [3] button.
Scrolling the folder name display Push the Control knob toward [FM] for at least 2 seconds.
3 Decide the folder to play
Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays.
Cancelling the Folder Select mode Press the [F. SEL] button.
English |
19
Menu system
Control knob
RDS indicator
Menu display
Menu System
Setting beep sound during operation, etc. The reference for the Menu items and their setting content is after this operation explanation.
4 Exit Menu mode
Press the [MENU] button.
/
· When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (With the subwoofer the sound outputs without being effected by fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout.
/
· It takes 3 to 4 minutes to synchronize the clock.
In Audio file source In Standby mode
Supreme Setting
When MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44. 1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (MP3, or WMA), and adjustment is made for the bit rate used. Display "SPRM ON" "SPRM OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. LED OFF.
Function of KDC-W4037 In Standby mode
/
· The sound effect may be imperceptible depending on the relationship between the audio file format and setting.
Selectable Illumination
Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green.
Function of KDC-W4037/KDC-W3537/ KDC-W3037/KDC-W311
News Bulletin with Timeout Setting Dimmer
You can lower the brightness of the display by using the dimmer function. Display "DIM ON" "DIM OFF" Setting The display dims. The tuner automatically changes when a news bulletin starts even if the radio is not being listened to. Display and Setting "NEWS OFF" "NEWS 00M" "NEWS 90M" . . .
22 |
English
When you set "NEWS 00M" -- "NEWS 90M", the News Bulletin Interrupt function is ON. [. . . ] If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated. Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
Yellow Blue/White Red Black
Battery Power Control Ignition (ACC) Earth (Ground) Connection
Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black
Rear Right (+) Rear Right () Front Right (+) Front Right () Front Left (+) Front Left () Rear Left (+) Rear Left ()
1 (Default setting) The A-7 pin (red) of the vehicle's ISO connector is linked with the ignition, and the A4 pin (yellow) is connected to the constant power supply.
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)
2 The A-7 pin (red) of the vehicle's ISO connector is connected to the constant power supply, and the A-4 pin (yellow) is linked to the ignition.
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)
3 The A-4 pin (yellow) of the vehicle's ISO connector is not connected to anything, while the A-7 pin (red) is connected to the constant power supply (or both the A-7 (red) and A-4 (yellow) pins are connected to the constant power supply).
Ignition cable (Red) Unit Battery cable (Yellow) A-7 Pin (Red) Vehicle A-4 Pin (Yellow)
/
· When the connection is made as in 3 above, the unit's power will not be linked to the ignition key. For that reason, always make sure to turn off the unit's power when the ignition is turned off. To link the unit's power to the ignition, connect the ignition cable (ACC. . . red) to a power source that can be turned on and off with the ignition key.
30 |
English
Installation/Removing the Unit
Installation
Metal mounting strap (commercially available) Firewall or metal support
Removing the Unit 1 Refer to the section <Removing the hard rubber
frame> and then remove the hard rubber frame.
2 Remove the screw (M4 × 8) on the back panel. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KDC-U353
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KDC-U353 will begin.