User manual KENWOOD KGC-7043

[. . . ] Make sure not to get your fingers caught between the faceplate and the unit. Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. [. . . ] When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the [#1] -- [#6] button for at least 2 seconds. On each band, 1 station can be put in the memory on each [#1] -- [#6] button. Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Each time the button is pressed the Traffic Information function turns ON or OFF. When a traffic information station isn't being received the "TI" indicator blinks. When a traffic bulletin starts, "TRAFFIC" is displayed it and it switches to traffic information. During reception of a AM station when the Traffic Information function is turned ON, it switches to a FM station. Traffic information station switching can be done when listening to the radio. The reference for the Menu items and their setting content is after this operation explanation. Example: When you want to set the beep sound select the "BEEP" display. When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This adjustment can be done when the <Synchronize Clock> (page 20) is set as OFF. Enter Clock Adjust mode Press the [4] or [¢] button for at least 2 seconds. News Bulletin with Timeout Setting It switches automatically when a news bulletin starts even if the radio isn't being listened to. When the news bulletin starts, "NEWS" is displayed, and it switches to the news bulletin. If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. The news bulletin volume is the same level that was set for traffic information (page 10). This function is only available if the desired station sends PTY-code for news bulletin or belongs to <Enhanced Other Network>Network sending PTY-code for news bulletin. [. . . ] If you do not want the power to go OFF automatically, cancel the Power OFF Timer function. If there's no media in this unit, you can't switch to each source. If the Disc changer isn't connected to it's input terminal, You can't switch to an external disc source. 27 Reconnect the speaker wires so that each output terminal is connected to a different speaker. [. . . ]