User manual KENWOOD KIV-BT900

[. . . ] · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Notes Do not use this unit before canceling Demonstration mode This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit of the Demonstration Mode> (page 5). · The demonstration is an operation image. It may be different from actual operation. How to reset your unit · If you experience problems during installation, consult your Kenwood dealer. [. . . ] Select "Settings" > "Clock & Date" > "Time Synchronized" > "ON" or "OFF". Enter Clock adjustment mode Turn the [Volume] knob and press it when the desired item is displayed. Turn the [Volume] knob and press it when the desired item is displayed. Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. KIV-BT900/ KIV-700 · Time zone Set a time zone for your area as "Home". When you set a time zone for different area to the "Sub", clocks for two time zones can be displayed on the clock display. For time zone list, see <Time zone list> (page 72). Initial Settings You can select following Initial Setting items. 3 1 4 Select the Standby Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Enter Menu List mode Press the [MENU] button. 2 38 | 3 Enter Initial Setting mode Turn the [Volume] knob and press it when the desired item is displayed. Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. "OFF"/ "STEP1"/ "2"/ "3" Turns ON/OFF the Supreme plus function. "ON"/ "OFF" Compensates the sound environment in accordance with the listening position. (Left) "L15" -- "0" -- "R15" (Right) Adjusts front/rear speaker balance. (Rear) "R15" -- "0" -- "F15" (Front) Refer to <Dual Zone System> (page 43). "ON"/ "OFF" To get clear sound, set the sound environment according to the location and size of physically installed speakers with reference to the followings: - Car Type Selection (page 44). "­8" -- "0" (AUX: "-8"-- "+8") Select the source Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source. Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Exit Audio Control mode Press the [MENU] button for at least 1 second. 2 3 4 5 "Supreme+" Remarks · DSP Set When "DSP Set" is set to "Bypass", the DSP function is disabled , and the colored items cannot be set. [. . . ] The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated. Wire or insulate the speaker cable properly and press the reset button. If the "Protect" code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can't support. [. . . ]