User manual KENWOOD KOS-L432

[. . . ] Model KOS-L432 Serial number 2 WARNING To prevent injury or fire, take the following precautions: â· Do not watch or fix your eyes on the unit's display when you are driving for any extended period. When the temperature of the unit falls such as during winter, the liquid crystal panel's screen will become darker than usual. 2 CAUTION To prevent damage to the machine, take the following precautions: â· You cannot view video pictures whilst the vehicle is moving. [. . . ] Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Each time the button is pressed for at least 1 second, the function control screen is changed. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. For safety's sake, leave the mounting and wiring work to professionals. â· Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. â· If the fuse blows, first make sure that the wires have not caused a short circuit, then replace the old fuse with one with the same rating. â· Do not let unconnected wires or terminals touch metal on the car or anything else conducting electricity. To prevent short circuits do not remove the caps from unused terminals or from the ends of the unconnected wires. â· After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. â· Thoroughly wipe away oil and other dirt from the installation surface. To prevent shorting, disconnect the battery cable from the negative terminal of the battery during installation. â· Follow the installation and wiring procedures described in this manual. Improper wiring or modified installation can not only result in malfunction or damage to the unit but may also result in an accident. â· A location which interferes with the operation of the air bag system. â· A location subject to direct sunlight, subject to the air from the air conditioner, or subject to moisture or high temperature. If you are not going to install the unit using the supplied monitor stand, be sure to use a commercially available monitor stand. (Mounting holes for such a stand are located on the bottom of the monitor unit. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]