User manual KENWOOD KSC-SW1

[. . . ] When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit Demonstration Mode> (page 4). How to reset your unit · If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button · If you experience problems during installation, consult your Kenwood dealer. · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. [. . . ] Turn the Control knob to select value, and then press the [ENTER] button. 20 | KDC-X494/ KDC-MP445U/ KSC-SW1 Function list Function items that appear when any source is selected Function item list "Settings" "Clock & Date" "DISP & ILLUMI" No. 12 13 14 15 16 17 18 19 20 21 08 09 "DISP Side Select" 10 "DISP Text Select" "DISP GRPHC Select" 11 36 "Clock Adjust" "Date Adjust" "Date Mode" "DISP OFF Mode" "Display Dimmer" "Text Scroll" "BT DVC Status" "ILLUMI Dimmer" "ILLUMI Effect" "ILLUMI Music SYNC" Function items that appear when the tuner source is selected Function item list "Settings" "Seek Mode" "Auto Memory" "MONO" No. 22 23 24 Function items that appear when the HD Radio source is selected Function item list "Settings" "Seek Mode" (HD Radio) "Auto Memory" (HD Radio) "Receive mode" "TAG Memory" "Tagging" No. 37 38 39 40 41 "Display Control" ("DISP SELECT") Function items that appear when the Satellite Radio source is selected Function item list "Settings" "Seek Mode" (Satellite Radio) "ESN Watch" No. 42 43 "DEMO Mode" Function items that appear during standby Function item list "Initial Settings" "SRC Select" "Key Beep" "Built-in AUX" "CD Read" "Favorite Delete" "Built-in AMP" "Speaker Select" "F/W Update #. ##" No. 28 29 30 31 32 33 34 35 Function items that appear when the AUX source is selected Function item list "Settings" "Name Set" No. 27 Function items that appear in the BT mode Function item list "Settings" "Phone Selection" "Audio Selection" "SMS Download" "SMS Inbox" "Voice Tag" "Detailed Settings" No. 44 45 46 47 48 49 50 51 52 53 54 55 56 57 Function items that appear during playback of a CD, audio file, or iPod Function item list "Play Mode" "Hands Mode" (iPod) "Track Scan" (CD)/ "File Scan" (Audio file) "Disc Random" (CD)/ "Folder Random" (Audio file/ iPod) "All Random" (iPod) "Track Repeat" (CD)/ "File Repeat" (Audio file/ iPod) "Disc Repeat" (CD changer)/ "Folder Repeat" (Audio file) "MGZN Random" (Disc changer) "Settings" "Skip Search" (iPod/ Music Editor media) "My Playlist Delete" (iPod) No. 01 02 03 04 05 06 07 25 26 "PB Name Edit" "PN Type Edit" "Device Regist. " "SPCL DVC Select" "Device Delete" "PIN Code Edit" "Auto Answer" "Bluetooth HF/ Audio" "Call Beep" "BT F/W Update" English | 21 Display Settings Selecting Display Type Shown below are examples of display types. Display type Type A Type B Type C Type D Type E Display information Displays 2 lines of text. Displays the spectrum analyzer. Selecting Text Display Changes displayed information on each of the following sources: 1 Enter Function setting mode Press the [FNC] button. In Tuner source Information Frequency Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank Display "Frequency" "Speana/Clock" "Date" "Indicator" "Blank" 2 Select Display control mode Turn the Control knob to select "Display Control", and then press the [ENTER] button. 3 Select the Display type Turn the Control knob to select Display type, and then press the [ENTER] button. 4 Select Display information item Turn the Control knob to select Display information item, and then press the [ENTER] button. When you hear a song you enjoy on your local HD Radio station, you only have to press the [ENTER] button. The saved songs will then show up in a playlist called "Tagged" in iTunes the very next time you sync your iPod to your computer. Then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store. Direct Access Tuning Entering the frequency and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "­ ­ ­ ­" is displayed. 2 Select Tuning item Press the [DIRECT] button on the remote control. Pressing the [DIRECT] button each time switches the following tuning items as follows. Tuning item Frequency Channel Cancelling Direct Access Tuning Display "­ ­ ­ ­" "CH ­" / "HD ­" -- 1 Enter HD Radio iTunes tagging mode Press the [ENTER] button. " TAG " will be indicated on the display when song information can be registered. "TAG Storing" is indicated on the display while a tag is being stored to this unit. "TAG Stored" is indicated on the display after a tag is stored. "TAG Transferred" is indicated on the display after a tag is stored to your iPod. 3 Enter the frequency or Channel Press the number buttons on the remote control. Example of frequency input: Desired frequency 92. 1 MHz (FM) 810 kHz (AM) Press button [9], [2], [1] [8], [1], [0] / · Turn "ON" the 41 iTunes Tagging of <Function setting> (page 16) when using this function. [. . . ] · Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device. Too Long: The word or utterance is too long to be recognized. No Phonebook: Data is not contained in the phone book. The number of voice tags reaches the maximum number to be registered in the phonebook. iPod Error: Favorite: No Memory: The procedure is not registered to Favorite Preset Memory No Access: The procedure preset with Favorite Control cannot be available. [. . . ]