User manual KENWOOD KSC-WD250

[. . . ] Make sure not to get your fingers caught between the faceplate and the unit. Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. [. . . ] NOTE Changing the Preset Button Settings for Programme Type After selecting the type of programme to be stored in a certain preset button, hold down that button for two seconds or more. The previously stored data for that button are erased and the new programme type is stored. Press the 4 or ¢ button to make a seek of frequencies with your selected type of programme. If your selected type of programme is found, the name of the station is displayed and the station is tuned into. If you make no key input in 30 seconds, the PTY selection mode will turn off automatically. If you want to select another type of programme, repeat steps 2 and 3 above. This function permits the text to be scrolled and the entire text to be displayed. You can display textual information being transmitted by RDS stations. 2 Pressing the DISP button for at least one second results in one If the RDS station currently tuned to is transmitting no text while the Radio Text Display mode is turned on, "NO TEXT" will appear in the display. To prevent accidents, drivers should not look at the display while on the road. 2 Pressing the DISP button for at least one second results in one When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes. Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. [. . . ] the default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated. When the connection is made as in 3, the unit's power will not be linked to the ignition key. For that reason, always make sure to turn off the unit's power when the ignition is turned off. [. . . ]