User manual KENWOOD NX-200SE

[. . . ] NXDNTM is a protocol name for a new digital communications system using 4-level FSK technology which has been co-developed by Kenwood and Icom. Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. Safety: It is important that the operator is aware of and understands hazards common to the operation of any transceiver. The AMBE+2TM voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. [. . . ] If they suffer serious damage, the battery may Do not short-circuit the battery!Do not join the + and ­ terminals using any form of metal (such as a paper clip or wire). Do not carry or store the battery pack in containers holding metal objects (such as wires, chainnecklace or hairpins). If the insulator is melted, the gas release vent or safety function is damaged, or the electrolyte is ignited, the battery may Do not use or leave the battery near fires, stoves, or other heat generators (areas reaching over 80°C/ 176°F)!If the polymer separator is melted due to high temperature, an internal short-circuit may occur in the individual cells and the battery may generate heat or smoke, rupture, or burst into Avoid immersing the battery in water or getting it wet by other means!If the battery's protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or Do not charge the battery near fires or under direct sunlight!If the battery's protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or Use only the specified charger and observe charging requirements!Temperature over the regulated value, excessive high voltage or current over regulated value, or with a remodelled charger), it may overcharge or an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into Do not pierce the battery with any object, strike it with an instrument, or step on it!The battery may generate heat or smoke, rupture, or burst into Do not jar or throw the battery!An impact may cause the battery to leak, generate heat protection circuit is damaged, the battery may charge at an abnormal current (or voltage), and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into Do not solder directly onto the battery!If the insulator is melted or the gas release vent or safety function is damaged, the battery may generate heat or smoke, Do not reverse the battery polarity (and terminals)!When charging a reversed battery, an abnormal chemical reaction may occur. In some cases, an unexpected large If the battery pack does not smoothly connect with a charger or operating equipment, do not force it; check the polarity of the battery. If the battery pack is reverse-connected to the charger, it will be reverse-charged and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into Do not touch a ruptured and leaking battery!If the electrolyte liquid from the battery gets into your eyes, wash your eyes out with fresh water as soon as possible, without rubbing your eyes. Do not place the battery pack into a microwave or high pressure container!The battery may generate heat or smoke, rupture, or burst into Keep ruptured and leaking battery packs away from fire! [. . . ] Press the key programmed as Key Lock to lock and unlock the transceiver keys. The signal strength indicator displays the strength of received If programmed by your dealer for a channel, the compander provide higher clarity of signals. On Conventional channels, if BCL is set up by your dealer, you If BCL Override has been programmed, you can transmit over the current signal: 1 Press and hold the PTT 2 3 Quickly release and then press the PTT call. The recording storage Voice Memos (NX-200/ NX-300 Only) To record a voice memo for later playback: 1 Press the key programmed as Voice Memo, press and hold the key programmed as Playback, or access the Speak into the microphone to record your memo. [. . . ]