User manual KENWOOD TK-90

[. . . ] Thank you for choosing KENWOOD for your radio telecommunication applications. We believe this easy-to-use transceiver will provide dependable communications to keep vehicles and personnel operating at peak efficiency. As a result, we feel strongly that you will be pleased with the quality and features of this product. Do not attempt to configure the transceiver while driving; it is too dangerous. [. . . ] Your dealer can program up to 4 special keys so that you can quickly and easily make a selcall to a specific station. Press the key programmed as Direct Call 1 to Direct Call 4 to send a selcall to the stations programmed onto those keys. â· Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor. 1 While in Selcall Mode, press the key programmed as Selcall to view the Selcall list. 2 Press the CH and keys to select the ID of the station you want to call. Alternatively, you can press the key to page the selected station, rather than making a voice call. While making the call, the When a Selcall is received, an alert tone will sound and the calling station's ID (or name) will appear on the display. To respond to the call, press the PTT switch and speak into the microphone. â· Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor. Begin your conversation by pressing the PTT switch and speaking into the microphone. Depending on the Auto Reset time set up by your dealer, your speaker will mute if no response is received. You can unmute the speaker to remain in standby mode by pressing the key programmed as Monitor. If a character message has been set up in one of the 4 available memory call locations, you can easily send those messages when making a Selcall. 1 While in Selcall Mode, press and hold the PTT switch, then enter the 3-digit ID of the station you want to call, followed by the # key. â· Releasing the PTT switch before entering the # key will cancel the call. â· The key is used as a wild card when entering group codes. For example, sending the group code 00 allows you to contact all stations that have "00" as the last 2 digits of their ID codes. 1 While in Selcall Mode, press the key programmed as Selcall to view the Selcall list. Begin your conversation by pressing the PTT switch and speaking into the microphone. You can send and receive 2-digit Status codes which may be decided in your talk group. [. . . ] Note: Playback keys can be set up for either voice messages or voice memos by your dealer. The keys function differently depending on how they are set up, so be sure to press a Playback key set up for use for voice messages. To play back a recorded voice memo: 1 Press the key programmed as Playback 1 to 4 to play back the specified voice memo. 2 Press the key and speak into the microphone to begin recording your message. [. . . ]