User manual KENWOOD VR-715

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-705 VR-715 KRF-V5070D KRF-V4070D KRF-V5570D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. 17 EN Normal playback Preparing for playback Some preparatory steps are needed before starting playback. Listening to a source component VOLUME CONTROL INPUT SELECTOR POWER ON/STANDBY SPEAKERS ON/STANDBY (KRF-V5070D/ V4070D/ V5570D) ON/OFF (VR-705/715) POWER ON/OFF (KRF-V5070D/ V4070D/ V5570D) AUTO INPUT SELECTOR Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing POWER ON/ STANDBY (for VR-705/715) or POWER ON/OFF and ON/ STANDBY (for KRF-V5070D/V4070D/V5570D) key. Input Selector VOLUME 1 Use the INPUT SELECTOR knob or keys to select the source Selecting the input mode If you have selected a component connected to the CD/DVD, VIDEO2, DVD or DVD/6CH (VR-715/KRF-V5070D only) jacks, make sure that the input mode setting is correct for the type of audio signal to be used. 8 you want to listen to. The input sources change as shown below: 1 2 3 4 5 6 7 "AUX" "TUNER" "CD/DVD" "TAPE" or "MD" "VIDEO1" "VIDEO2" "DVD" or "DVD/6CH" (for VR-715/KRF-V5070D only) Selecting MD/TAPE Select the source name corresponding to the component connected to the MD/TAPE jacks. To change the source to "MD", follow the steps below: 1 Use the INPUT SELECTOR knob to select "TAPE". · To return to the original indication, repeat procedure 2. 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the volume. Setting the speaker status The speaker indicator lights up. Press the SPEAKERS ON/OFF key to switch the speaker on or off. 18 EN Normal playback Adjusting the sound Adjusting the LOUDNESS mode (remote control only) SPEAKERS ON/OFF ACTIVE EQ VOLUME CONTROL You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the LOUDNESS setting ON. To cancel Press the LOUDNESS key again so that the "LOUDNESS" indicator goes off. PHONES MULTI CONTROL MUTE Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. BASS BOOST MUTE LOUDNESS MULTI CONTROL ACTIVE EQ TONE VOLUME To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the volume control knob. Adjusting the TONE (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 2 Use the MULTI CONTROL knob or keys to select TONE ON/OFF. ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode Press the ACTIVE EQ key for the following selections; 1 ACTIVE EQ MUSIC : Effective when listening to music. (The ACTIVE EQ LED indicator lights up. ) 2 ACTIVE EQ CINEMA : Effective when watching a movie. (The ACTIVE EQ LED indicator lights up. ) 3 ACTIVE EQ TV : Effective when watching TV. (The ACTIVE EQ LED indicator lights up. ) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ LED indicator goes off. ) · ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON and during 96kHz LPCM playback. 3 When in TONE ON selection, press the TONE key for the following displays. 4 Use the MULTI CONTROL knob or keys to adjust the sound quality. · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. Listening with headphones 1 Press the SPEAKERS ON/OFF key so that the speaker indicator goes off. Make sure the SP indicator is turned OFF. Once-touch low frequency emphasis (BASS BOOST) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. · Press the key once to select the maximum (+10) low frequency emphasis setting. · This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. £~¶ · If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES Switching back the previous setting Press the BASS BOOST key again. 3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the volume. 19 EN Recording Recording audio (analog sources) 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode during digital input. [. . . ] at 8 one channel driven) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . at 8 one channel driven) (KRF-V5570D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 05% (1 kHz, 50 W, 8) Frequency response CD/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz ~ 70 kHz, +0 dB, ­3. 0 dB Signal to noise ratio (IHF'66) CD/DVD, AUX, TAPE, VIDEO1, VIDEO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]