User manual KONFTEL 200W

[. . . ] The Konftel 200W connects to different makes of GAP-compatible DECT systems. You can find out which DECT systems have been tested with the Konftel 200W on our website, www. konftel. com. If your office does not have a compatible DECT system, Konftel can supply a DECT base station for analogue connection. Please note that you need to connect (register) your Konftel 200W to a DECT base station before it can be used. [. . . ] Please consult Konftel's website under FAQ for other commands. 10 ADVANCED FEATURES UPDATING THE PHONEBOOK The Konftel 200W has a phonebook that holds up to 50 entries. See page 8 for making calls using the speed dial list. General information about entering text using the keypad Enter a name in the address book using the keypad. Each key covers a number of letters and other characters - far more than shown on the key (see page 4). If there are two letters under the same key that you want to enter one after the other, you need to pause slightly before entering the second letter. The ring tone can be turned off by selecting the symbol that shows a crossed-out bell. The selected setting is saved. Done Press OK. ADJUSTING DATE AND TIME Press the MENU key. Press OK. The current date and time appear in the top of the display. The selected setting is saved. Change the date using the Up/down key and confirm Change the month and confirm with OK. Done 14 SETTINGS CHANGING LANGUAGES Press the MENU key. English Press OK. Done The selected setting is saved. ADJUSTING KEy TONE You can select whether or not you want a tone to be heard when you press a key. Note that this setting does not affect the key tone you hear when you dial a number. Keypad tone Press the MENU key. Press OK again to confirm Keypad tone which is the first option on the menu. Off Done Select On or Off using Up/down. Press OK. The selected setting is saved. 15 SETTINGS SELECTING A DECT BASE STATION Use this option to choose one of the registered base stations. You can also let Konftel 200W automatically select the base station with the strongest signal. See page 6 for instructions on how to register with a new base station. Base Press the MENU key. option Auto using the Up/down key. Look through the registered base stations and the Auto Auto will automatically select the base station with the strongest signal. The chosen option is marked with a tick. Press OK. Search The conference unit will now search for the selected base station. If the base station is found, the word Done will appear in the display. Select another base station if that is the case, or check that the base station you wanted actually is connected and within range. Done Press OK. 16 SETTINGS SHOWING STATUS Use this option to check the ID number of either the conference unit or base station. This information can be useful in an installation with many units. Status Press the MENU key. Press the Up/down key. PARK 0412151105 IPEI: 0412150005 The ID number (RFPI, PARK) of the current base station appears in the display. The ID number (IPEI, HS no. ) of the conference phone appears in the display. Press OK to return to the menu. DEREGISTERING A PHONE This only applies to a Konftel DECT base station. Seven telephones (handsets or Konftel 200W) can be registered with a Konftel DECT base station. [. . . ] If the Konftel 200W needs to wait for a second dialling tone, you should enter a pause using the pause/mute key when entering a telephone number as an instruction or in the phonebook. 24 TECHNICAL DATA KONFTEL 200W CONFERENCE PHONE Power supply: Speaker volume: Room echo reduction: Line echo reduction: Environment: Transformer 12V DC/230V AC, 700mA (Europe) Transformer 12V DC/120V AC, 700mA (USA) Adjusts to 15 levels 208 ms 38 ms Pickup range <30 m2 Reverberation time in room <500 ms Background noise <45 dBA Temperature range: 5­40° C Diameter 232 mm 700 grams Dimensions: Weight: Approvals Electrical safety: EMC: DECT/radio: EN60950:2001 EN301489-01/06:2000 European DECT standard: EN301406-V1. 4. 1 2001 (DECT frequency: 1880-1900 MHz, average power is 10 mW per channel DECT output power: 250 mW peak power in one of 24 time slots, ~10mW/channel DECT range: Unobstructed range, up to 300 metres. GAP standard: TBR22 The unit can generate a tone when used in environments where there is strong radio interference or high-frequency interference in the power supply cable and will then resume normal function once the interference has stopped. 25 TECHNICAL DATA KONFTEL DECT BASE STATION (ACCESSORIES) Power supply: Cable length: Tele connection: Compatibility: Transformer 230 V AC/6 V DC, 300 mA 2 metres Analogue PBX or PSTN, RJ-11 A Konftel DECT base station is GAP-compatible and can be connected to analogue lines or any PBX equipped with an analogue extension. Up to 7 GAP-compatible DECT units can be connected to a Konftel DECT base station 175x160 mm 240 grams Dimensions: Weight: Approvals Electrical safety: EMC: DECT/radio: EN60950:2001 EN301489-01/06:2000 European DECT standard: EN301406-V1. 4. 1 2001 (DECT frequency: 1880­1900 MHz, average power is 10 mW per channel DECT output power: 250 mW peak power in one of 24 time slots, ~10 mW/channel DECT range: Unobstructed range, up to 300 metres. GAP standard: Tele: TBR22 TBR21:1998 26 TECHNICAL DATA EXPANSION MICROPHONES (ACCESSORIES) Power supply: Cabling: Environment: Dimensions: Power from microphone output Modular 4/4-contacts, 2x1. 5 m and 2x2. 5 m Temperature range: 5­40° C Diameter 105 mm, height 30 mm REMOTE CONTROL (ACCESSORIES) Batteries: Environment: Range: Dimensions: Weight: Keyboard: 4 x R03, 1. 5V Temperature range: 5­40°C Up to 5 metres 205x55x21mm (LxBxH) 140 grams 26 keys 27 SERVICE AND GUARANTEE Contact a Konftel retailer first if your conference telephone needs servicing. [. . . ]