User manual KRUPS YY3073FD

[. . . ] CAUTION: Please read the safety instructions before using your appliance The appliance is ready to be used. Check coffee grounds collector is not missing or incorrectly positioned. One beep when pressing ON/OFF: turning on the power on the activated appliance. One beep every ten seconds: the appliance is awaiting instructions from the user. [. . . ] Rinsing out the coffee circuit: Place a container under the coffee nozzles. 6 quickly to start a coffee circuit rinsing cycle, Rinsing out the steam circuit: Place a container under the steam nozzle and press the which will automatically stop after around 300 ml. Button for 3 seconds to start a steam circuit rinsing cycle, When a cleaning operation is necessary, the appliance warns you of this by flashing the `CLEAN' light. To benefit from the guarantee conditions, it is essential to perform the appliance cleaning cycle when informed to do so. When the indicator light flashes, you can continue to use the appliance but it is recommended that you carry out the program as soon as possible. The `CLEAN' light becomes constant and the indicator lights and flash. At the end of this phase, the sound signal emits a beep every 10 seconds and you can empty the used water container and the drip tray. When the cleaning cycle is finished, the indicator light `CLEAN' goes out. If there is not enough water in the water tank when you start the program, the light will come on to warn you. Add the appropriate amount of water to the container and cleaning will continue automatically. If you unplug the appliance during cleaning, press the button, or there is an electrical power cut, the cleaning program will start again from the beginning. At the end of this phase, the sound signal beeps every 10 seconds Remove and empty your used water container and put it back in place. When the descaling cycle is finished, the indicator light `CALC' goes out. If there is not enough water in the water tank, you will be warned by the light. Add the appropriate amount of water to the tank and scale removal will continue automatically. If you unplug the appliance during cleaning, press the button, or there is an electrical power cut, the cleaning program will start again from the beginning. Make sure to carry out the full cleaning cycle to ensure good maintenance of your appliance. The cleaning cycle is intermittent: do not put your hands under the water outlets `E' and `W' while the cycle is in progress. long rinsing program ­ total duration: about 2 minutes When it is necessary to make a long rinsing program, the appliance warns you of this by flashing the `CLEAN' and `CALC' lights. The lights `CLEAN' and `CALC' become constant and the indicator light starts flashing. When the long rinse is finished, the lights `CLEAN' and `CALC' go out and the indicator light becomes constant. oTHER FUNCTIONS To switch the appliance off You can switch off your appliance at any time. [. . . ] Check that the coffee bean container has coffee in it and that it is dispensing correctly. The appliance has restarted automatically and is ready for a new cycle. The appliance only requests to be cleaned once it has made several types of coffee. The appliance only requests a descaling cycle once it has made a certain number of drinks using steam. [. . . ]